Müşteri Değerlendirmesi

Bir Değerlendirme Yaz
  • Toplam (35) İnceleme
  • (6) Görüntü
  • (0) Video
  • Tüm Yıldızlar
    • Tüm Yıldızlar(35)
    • 5 Yıldız(30)
    • 4 Yıldız(1)
    • 3 Yıldız(3)
    • 2 Yıldız(0)
    • 1 Yıldız(1)
Göre sırala:
En İyi İnceleme
  • En İyi İnceleme
  • En Yararlı
  • En Son
Yalnızca ülkenizden yorumlar (Turkey)
Orjinali göster

İncelemenin bir kısmı otomatik olarak çevrildi.

  • 22/12/2020

    Ευτυχώς έφτασαν! Ευχαριστώ πολύ!

    Yorumlar (2)
    Orjinali göster
  • 15/01/2019

    This is a PROPER all metal hot-end. The teflon bowden tube does NOT contact the nozzle, allowing print temperatures over 250'C. And ..... it is very cheap .... but nicely made. One little issue: flat-head M3 bolts are supplied, while the heater block is clearly designed for tapered hed bolts.

    Orjinali göster
  • 20/07/2019

    lo re enviaron despues de una entrega errónea

    Orjinali göster
  • 17/08/2020

    come as ordered

    Orjinali göster
  • 29/05/2019

    tudo certo, ótimo produto!

    Orjinali göster
  • 22/02/2019

    looks great, didn't install it yet

    Orjinali göster
  • 13/01/2021

    I bought this for my Creality Ender 5 Plus printer. The build quality is decent and should perform well. The parts arrived very loosely assembled but it needs to be tightened at or above printing temps anyway.

    Orjinali göster
  • 17/01/2021

    a prima vista sembra ok lo devo provare

    Orjinali göster
  • 29/03/2021

    Gotta admit, this a legitimate replica of a all-metal hotend and I bet it performs well, however, some adjustment have to be made for it function properly. There is some youtube videos out there discussing the issues which include adjusting the retract distance which is reasonable but a bigger problem is the poor heat transfer between the heat block and the heatsink which causes inefficient heat dissipation and makes the heat sink too hot making the filament clog. This issue is addressed in the videos but be wary of this before buying.

    Orjinali göster
  • 10/07/2019

    Hotend under extruded and eventually clogged. The heater cartridge is held into place by a single tiny set screw, that's it. There is not enough surface area for the heater cartridge to transfer heat. A genuine microswiss has a flexible heater block and uses 2 set screws to transfer heat from the Ender 3's stock heater cartridge.

    Orjinali göster

    Toplam 0 sayfaları

    Sayfaya git


    İlginizi çekebilir

    recommendation for you
    • TRY25.55
    • TRY30.44
    • TRY29.22
    • TRY97.69
    • TRY1,222.47
    • TRY109.91
    • TRY268.85
    • TRY476.69
    • TRY171.04
    • TRY36.56
    • TRY1,222.47
    • TRY73.23
    • TRY171.04
    • TRY170.31
    • TRY782.34
    • TRY83.01
    • TRY562.27
    • TRY195.49