Müşteri Değerlendirmesi

4.5 üzerinden
Bir Değerlendirme Yaz
  • Toplam (2) İnceleme
  • (1) Görüntü
  • (0) Video
  • Tüm Yıldızlar
    • Tüm Yıldızlar(2)
    • 5 Yıldız(1)
    • 4 Yıldız(1)
    • 3 Yıldız(0)
    • 2 Yıldız(0)
    • 1 Yıldız(0)
Göre sırala:
En İyi İnceleme
  • En İyi İnceleme
  • En Yararlı
  • En Son
Yalnızca ülkenizden yorumlar (Turkey)
|
Orjinali göster

İncelemenin bir kısmı otomatik olarak çevrildi.

  • 08/06/2019

    The appearance of the product (after construction) corresponds to the pictures available on web site. The product arrives as a kit to assemble. It arrived 2 months after order, a longer delay than usual. Globally the quality seems correct. The plastic parts 3D printed are good. I don't think that the weaknesses of the machine will come from these parts. The light assembly manual provided didn't help much: it wasn't the right one... I finally was able to assemble the machine thanks to the pictures available on web site, and by using a few screws from my own stock since they were missing from the kit. An other problem was that a cable for one stepper motor is missing (3 cables for 4 motors...). Finally, I was unable to enable the spindle using the provided controller controlled using grbl (commands M3, S1000 for iinstance to enable rotation theoretically...). I have signaled the different problems to Banggood, and I hope that they will fix those issues soon. In the meantime, I will try to fix the issues by myself. I will post again, once these issued will be solved.

    Yorumlar (1)
    Orjinali göster
  • 26/02/2020

    Good CNC machine. But the beginning was very difficult. The instructions are for another device. The Z axis has been connected upside down! It had to be inverted. Some parts were missing and some were extra. The GRLB program does not work correctly on an older win7 laptop. Except for a good Win10 laptop, the GRLB program works well. No indication of XY setting in GRLB (screw travel, belt). The manual contains a three-axis machine with screw travels. Dobrý stroj CNC. Začátek byl ale velmi náročný. Návod je pro jiný přístroj. Osa Z byla zapojena obráceně! Bylo nutné ji zapojit opačně. Některé díly chyběly a některé byly navíc. Program GRLB nepracuje korektně na starším notebooku s win7. Až na kvalitním notebooku s Win10 pracuje GRLB program dobře. Žádný údaj o nastavení XY v programu GRLB (šroubový pojezd, řemen). V návodu je stroj se třemi osami s šroubovými pojezdy

    Yorumlar
    Orjinali göster
Show:

    Toplam 0 sayfaları

    Sayfaya git

    Git

    İlginizi çekebilir

    recommendation for you
    • TRY2,627.64
    • TRY2,344.26
    • TRY2,344.26
    • TRY99.53
    • TRY2,318.49
    • TRY686.90
    • TRY2,567.53
    • TRY2,885.26
    • TRY2,636.23
    • TRY1,914.89
    • TRY2,181.10
    • TRY3,434.85
    • TRY437.87