İncelemenin bir kısmı otomatik olarak çevrildi.
i grabed them for my new build along with the emax RS2205, they feature the Silabs f390 Chipset so they are Multishot capable, they can be programed with eithe ran arudino (uno in my case) or most Silabs linkers, ot through cleanflight. They are a bit bigger then the 20A but with about 4.8kg of thrust i dont cry for 16g in total.
the best esc for 4S quads. performing great with emax rs2205
I received them with BL-Heli 14.6 and with a configuration for multi ( See the BL-Heli screenshot). I upgraded them to BL-Heli 14.8 (which was the latest version at that time) without any problem.
Really nice ESC's to pair with Emax RS2205 motor. The build is pretty good.
Works great with my Emax RS2205 2300kv motors!
They arrived in perfect conditions, all well packaged. I'm using them together with Emax 2205 red bottom <3
A relatively small esc with a great deal of power output. Perfect for running emax mt2205 red bottoms (race edition). The escs are a little larger than the 20A littlebees, making them a bit too large to fit on a 180 frame (in that case I recommend going with 20A, as you'll only be swinging 4" props anyway). For a 200mm frame or larger they fit perfectly.
I just ordered a set for a new setup, and after the soldering work I find it impossible to flash and configure blheli software, the ESCs just won't connect, using either the direct way throught flight controller via cleanflight or one by one using USB linker. Now i'm stopped and cannot finnish the project. I do have other 9 LB 20a ESCs that work fine, though.
Super Regler
I use them with EMAX MT2205 II KV2300 RC. Cold and works perfect