Müşteri Değerlendirmesi

Bir Değerlendirme Yaz
  • Toplam (381) İnceleme
  • (30) Görüntü
  • (0) Video
  • Tüm Yıldızlar
    • Tüm Yıldızlar(381)
    • 5 Yıldız(354)
    • 4 Yıldız(18)
    • 3 Yıldız(5)
    • 2 Yıldız(2)
    • 1 Yıldız(2)
Göre sırala:
En İyi İnceleme
  • En İyi İnceleme
  • En Yararlı
  • En Son
Yalnızca ülkenizden yorumlar (Turkey)
|
Orjinali göster

İncelemenin bir kısmı otomatik olarak çevrildi.

  • 09/01/2022

    I have purchased two of these clamps and received them before the estimated delivery date. The packaging is substantial and the clamps arrived undamaged. The clamps are well made and work as expected. They are a new twist on an old idea, the Holdfast which woodworkers have been using for a very long time, see photo. When using the clamp, to get full clamping pressure the clamp must be pushed down hard on the work piece with the cam lever in the reset position. If this is not done the cam has to take up any gap before exerting pressure on the work piece. When the cam exerts pressure on the work piece it causes the knurled shaft in the dog hole to press against the sides of the dog hole. This pressure is only at the top and bottom of the dog hole as the cam tries to rotate the clamp within the dog hole. The knurled shaft does not need to be knurled all the way round as it only bears on the dog hole where it is in line with the clamp arm. If the knurling was only where needed it would make fitting the clamp in the dog hole easier. If the clamp will damage the dog holes over extended use, only time will tell.

    Yorumlar
    Orjinali göster
  • 29/10/2021

    Package arrived in very good condition. The clamp is well protected in the foam and carton box. The solid piece of aluminium gives a good first impression. The lever which is acting as a cam for different pressure levels has a bit of friction with the pressure area. I put some PTFE and is ok. The cam is running perfectly parallel to the pressure plate which means pressure is well distributed. One of the 2 bolts is a bit proud of the pressure plate and it will mar the workpiece if in contact. It needs filing. This means taking the other 4 bolts off connecting the steel spring to the main body. The cross hatched pillar is sligtly bigger than 20mm (just shy of 20.1mm) as can be seen in the vernier reading. I guess it will need a bit of light sanding down.

    Yorumlar
    Orjinali göster
  • 04/12/2021

    Grampo muito prático e resistente, ótimo para uso em bancadas com furos para fixação. Fabricado com excelente qualidade e totalmente em metal. chegou muito bem embalado, como pode ser visto na foto anexada. Prende as peças com boa pressão, garantindo que elas fiquem imobilizadas durante o trabalho. Apenas tome cuidado com o diâmetro do cilindro de fixação, pois são dois tamanhos diferentes, 19 e 20mm.

    Yorumlar
    Orjinali göster
  • 02/12/2021

    This clamps are very well made and nice to handle. Proud owner of this quality product. Thanks Dennis from Hooked On Wood for his recommendation.

    Yorumlar
    Orjinali göster
  • 21/12/2021

    Uma ferramenta de excelente qualidade. Prazo entrega muito bom. Comprei duas unidades e não aconselho só uma unidade. Vem com uma embalagem de qualidade. Estou satisfeito e aconselho vivamente. Recebi através da GLS a quem a agradeço pela eficiência e profissionalismo.

    Yorumlar (1)
    Orjinali göster
  • 22/11/2021

    Produto bem acabado. Robusto e macio de usar. Prende com firmeza. Muito bem acondicionado.

    Yorumlar
    Orjinali göster
  • 21/11/2021

    Excellent dog clamps. Had a strong clamping power, easy to use and apply. Excellent quality.

    Yorumlar
    Orjinali göster
  • 08/11/2021

    Saw this in one of the Hooked on Wood reviews; so following the recommendation there decided to try it out. Was well packaged and seems to be very well built. No complaints with the holding power or design. Might end up having to get a couple more at some point. Fast shipping.

    Yorumlar
    Orjinali göster
  • 14/10/2021

    Great wee clamps well made and easy to use in 20mm bench holes came well presented in foam lined cardboard box, which would allow me to have them stored protected in a workbench drawer

    Yorumlar
    Orjinali göster
  • 01/12/2021

    Sehr gute Qualität und ich war überrascht, wie genau die Maße stimmen.

    Yorumlar
    Orjinali göster
Show:

    Toplam 0 sayfaları

    Sayfaya git

    Git

    İlginizi çekebilir

    recommendation for you
    • US$19.99
    • US$21.99
    • US$16.99
    • US$16.99
    • US$29.99
    • US$4.99
    • US$114.99
    • US$27.99
    • US$5.99
    • US$16.99