STM32F401 Geliştirme Kartı STM32F401CCU6 STM32F4 Öğrenme Kartı
İncelemenin bir kısmı otomatik olarak çevrildi.
It work very well. Programming is easy using stm32duino with PlatformIO. Flashing is easy using NRST and BOOT0 with a single finger to activate DFU over USB. Debugging is simple using serial port over USB. One important thing need to be noticed: if you can't see DFU firmware after doing the DFU boot sequence, warm-up the stm32 chip with your finger. It need to be at least at 25 degC to work. Even with this DFU issue, it stays a very good product.
Top! Pinnender sind mit dabei und Programmierung über die SWD Schnittstelle funktioniert einwandfrei. Die USB-C Schnittstelle ist zwar da, jedoch ist auf dem Chip kein USB-Bootloader geschrieben. Rein theoretisch müsste man ihn auch über USB-C programmieren können, wenn ein entsprechender Bootloader geschrieben wurde. Dazu braucht man ein Programmiergerät (ST-Link). In meinem Fall verwende ich die St-Link Schnittstelle eines alten kaputten Nucleo Entwicklungsboards.
Good quality STM32F401 dev board. WeAct Black Pill V1.2
i tested the product with a hello world using stm32cubeide + stlink-v2 and it works fine.
ok. haven't test it yet
Nice quality. USB-C is great. Ideal for all sorts of DIY projects. Mine will be used for a custom mechanical keyboard.
have not tested it but seems good
Fonctionne bien. J'utilise le programmeur ST-link V2 et le logiciel STlink-gui pour télécharger le fichier binaire généré par le logiciel STM32CubeIDE.
very happy with this board,very easy to set up now with the arduino ide. Now you can hook it up to run on the USB port,it’s great.I’m always happy with Banggood when it comes to quality and prices. 👍
Awesome product