Müşteri Değerlendirmesi

Bir Değerlendirme Yaz
  • Toplam (138) İnceleme
  • (5) Görüntü
  • (0) Video
  • Tüm Yıldızlar
    • Tüm Yıldızlar(138)
    • 5 Yıldız(130)
    • 4 Yıldız(6)
    • 3 Yıldız(2)
    • 2 Yıldız(0)
    • 1 Yıldız(0)
Göre sırala:
En İyi İnceleme
  • En İyi İnceleme
  • En Yararlı
  • En Son
Yalnızca ülkenizden yorumlar (Turkey)
|
Orjinali göster

İncelemenin bir kısmı otomatik olarak çevrildi.

  • 05/05/2020

    I have tested each attenuation 0 dB (reference), 10 dB, 20 dB and 30 dB with my calibrated VNA HP 8753D (30kHz to 6GHz) and all was in tolerance from 30 kHz to 4 GHz (I have done measurement up to 6 GHz) except the 20dB attenuation which was out of expected tolerance from 3.1GHz up to 4GHz or more. => Frequency 3.1 GHz, S21 Gain -18.8 dB, Delta dB of +1.2 dB when it was expected to be +/-1.1 dB => Frequency 4 GHz, S21 Gain -18.2 dB, Delta dB of +1.8 dB when it was expected to be +/-1.1 dB => Outside 4 GHz there is big discrepancies up to Delta dB of +6.7 dBmore than expected tolerance for example at 5.4 GHz S21 Gain -13.3 dB => delta dB +6.7 For more details with full report see: https://hydrabus.com/DC_to_4GHz_RF_Fixed_Attenuator_VNA_Tests_BVERNOUX_05May2020.pdf For all VNA S2P files see: https://hydrabus.com/DC_to_4GHz_RF_Fixed_Attenuator_VNA_Tests_BVERNOUX_05May2020_S2P.7z

    Yorumlar
    Orjinali göster
  • 07/07/2019

    Top quality attenuator !! Recommended !!

    Yorumlar
    Orjinali göster
  • 10/04/2017

    10dB: SWR 1:1.5 to 4G. Atten Flat, 9.56dB at 4G. At 10 GHz 11 dB. Surprisingly good ! 20dB: SWR 1:1.34 to 4G. Atten Flat 18.8 at 3.5GHz. 17dB at 6G, 15dB at 8G. 30dB: SWR 1:1.45 to 4G. Atten Flat 28.5 at 4.8G 28 at 5.4G 25dB at 7G. Pin depth fully OK ± 0.0015" on all 8 contacts. Good value for the price. All measured with professional expensive instruments. Some solder residue on the board, but easily cleaned off.

    Yorumlar
    Orjinali göster
  • 25/10/2017

    I needed to attenuate a high power signal. It worked very well.

    Yorumlar
    Orjinali göster
  • 20/11/2019

    Gute Qualität zu einem gutem Preis! Ich habe die SMA Buchsen zusätzlich mit der Unterseite der Platine verlötet, um noch besseren Halt zu garantieren, ist aber nicht unbedingt nötig. Die Impedanzen sind in einem engen Bereich (+/- 1 Ohm) um 50 Ohm.

    Yorumlar
    Orjinali göster
  • 16/10/2020

    Haven't tried yet but it looks nice and well built.

    Yorumlar
    Orjinali göster
  • 04/02/2020

    abbastanza buoni ...

    Yorumlar
    Orjinali göster
  • 22/01/2022

    Good quality at a good price

    Yorumlar
    Orjinali göster
  • Jumbo62
    CH
    01/11/2021

    Looks good.

    Yorumlar
    Orjinali göster
  • 23/10/2021

    Nice unit 0db not very useful, 1db much better.

    Yorumlar
    Orjinali göster
Show:

    Toplam 0 sayfaları

    Sayfaya git

    Git

    İlginizi çekebilir

    recommendation for you
    • US$15.98
    • US$91.01
    • US$24.59
    • US$129.14
    • US$25.82
    • US$30.74
    • US$73.99
    • US$53.47
    • US$35.66
    • US$56.57
    • US$65.18
    • US$16.26
    • US$52.72
    • US$13.73
    • US$22.13
    • US$19.99
    • US$9.49
    • US$40.58