Arivved in a short number of days and in a very good package. Not assembled yet but all the parts look in good conditions.

Arivved in a short number of days and in a very good package. Not assembled yet but all the parts look in good conditions.

Arivved in a short number of days and in a very good package. Not assembled yet but all the parts look in good conditions.

I found the following regarding the Arduino software: - The software seems to work well BUT the software is NOT the same as any of the .ino files contained in the download referenced in the instructions - Manipulator Suite V2.0 Resource Pack. - Hence if you want to experiment with the firmware in the Resource Pack, it can be a good idea to purchase a second ARDUINO UNO and use that for the experiments. - While the kit includes an IR remote, the firmware installed in the kit does not seem to have the IR program. - The IR codes from the remote do not match the IR codes used in the IR software in the Resource Pack. - The Resource Pack has two main programs, mearmJoystick.ino and armbotJoystickB.ino - mearmJoystick.ino produces similar behaviour to the pre-installed software but is inferior. NOT recommended unless you do a substantial re-write. With the pre-installed software and mearmjoystick.ino, the joysticks directly control the servos as described in the instructions. - The armbotJoystickB software operates in a very different way. The joysticks are used to set the position of the gripper in terms of x, y and z co-ordinates. The left joystick horizontal is used to increase/decrease the x co-ordinate. The left vertical is used to set the z co-ordinate and the right joystick vertical is used to set the y coordinate. The right horizontal is used to open/close the gripper. If you change one coordinate, at least 2 and sometimes 3 servos will operate to re-position the gripper to the new point in 3D space. Sitting behind the Robot Arm, the x axis is sideways, the z axis points ahead, and the y axis is vertical. Lots to explore with this software - very educational.

I found the following regarding the Arduino software: - The software seems to work well BUT the software is NOT the same as any of the .ino files contained in the download referenced in the instructions - Manipulator Suite V2.0 Resource Pack. - Hence if you want to experiment with the firmware in the Resource Pack, it can be a good idea to purchase a second ARDUINO UNO and use that for the experiments. - While the kit includes an IR remote, the firmware installed in the kit does not seem to have the IR program. - The IR codes from the remote do not match the IR codes used in the IR software in the Resource Pack. - The Resource Pack has two main programs, mearmJoystick.ino and armbotJoystickB.ino - mearmJoystick.ino produces similar behaviour to the pre-installed software but is inferior. NOT recommended unless you do a substantial re-write. With the pre-installed software and mearmjoystick.ino, the joysticks directly control the servos as described in the instructions. - The armbotJoystickB software operates in a very different way. The joysticks are used to set the position of the gripper in terms of x, y and z co-ordinates. The left joystick horizontal is used to increase/decrease the x co-ordinate. The left vertical is used to set the z co-ordinate and the right joystick vertical is used to set the y coordinate. The right horizontal is used to open/close the gripper. If you change one coordinate, at least 2 and sometimes 3 servos will operate to re-position the gripper to the new point in 3D space. Sitting behind the Robot Arm, the x axis is sideways, the z axis points ahead, and the y axis is vertical. Lots to explore with this software - very educational.

I found the following regarding the Arduino software: - The software seems to work well BUT the software is NOT the same as any of the .ino files contained in the download referenced in the instructions - Manipulator Suite V2.0 Resource Pack. - Hence if you want to experiment with the firmware in the Resource Pack, it can be a good idea to purchase a second ARDUINO UNO and use that for the experiments. - While the kit includes an IR remote, the firmware installed in the kit does not seem to have the IR program. - The IR codes from the remote do not match the IR codes used in the IR software in the Resource Pack. - The Resource Pack has two main programs, mearmJoystick.ino and armbotJoystickB.ino - mearmJoystick.ino produces similar behaviour to the pre-installed software but is inferior. NOT recommended unless you do a substantial re-write. With the pre-installed software and mearmjoystick.ino, the joysticks directly control the servos as described in the instructions. - The armbotJoystickB software operates in a very different way. The joysticks are used to set the position of the gripper in terms of x, y and z co-ordinates. The left joystick horizontal is used to increase/decrease the x co-ordinate. The left vertical is used to set the z co-ordinate and the right joystick vertical is used to set the y coordinate. The right horizontal is used to open/close the gripper. If you change one coordinate, at least 2 and sometimes 3 servos will operate to re-position the gripper to the new point in 3D space. Sitting behind the Robot Arm, the x axis is sideways, the z axis points ahead, and the y axis is vertical. Lots to explore with this software - very educational.

Fast delivery and well-packed.Well made product and package.I have not test it yet.The only drawback is that i can not download the program (for graphical programming from the company site)

Fast delivery and well-packed.Well made product and package.I have not test it yet.The only drawback is that i can not download the program (for graphical programming from the company site)

Fast delivery and well-packed.Well made product and package.I have not test it yet.The only drawback is that i can not download the program (for graphical programming from the company site)

Great little kit, comes with everything you need to build and control the robotic arm. The supplied instructions were a struggle to get in English but found you can Google MeArm and use those instructions but there are many variants so make sure you find the right one. Age rating suggests from 8 but my 9yo son lost interest as is fairly complex to assemble. Final construction is great but movement is a little jerky, with some fine tuning this can be improved but takes a little work. I plan to add a Bluetooth module to the supplied board to allow Bluetooth connection and be able to program repetitive motion.

Great little kit, comes with everything you need to build and control the robotic arm. The supplied instructions were a struggle to get in English but found you can Google MeArm and use those instructions but there are many variants so make sure you find the right one. Age rating suggests from 8 but my 9yo son lost interest as is fairly complex to assemble. Final construction is great but movement is a little jerky, with some fine tuning this can be improved but takes a little work. I plan to add a Bluetooth module to the supplied board to allow Bluetooth connection and be able to program repetitive motion.

Great little kit, comes with everything you need to build and control the robotic arm. The supplied instructions were a struggle to get in English but found you can Google MeArm and use those instructions but there are many variants so make sure you find the right one. Age rating suggests from 8 but my 9yo son lost interest as is fairly complex to assemble. Final construction is great but movement is a little jerky, with some fine tuning this can be improved but takes a little work. I plan to add a Bluetooth module to the supplied board to allow Bluetooth connection and be able to program repetitive motion.

Recebi o produto e está tudo de acordo

Recebi o produto e está tudo de acordo

Recebi o produto e está tudo de acordo

👍👍👍

👍👍👍

👍👍👍

alles ok

alles ok

alles ok

It says "Order Completed", but I stil not yet received what I ordered. So I'm not happy!

It says "Order Completed", but I stil not yet received what I ordered. So I'm not happy!

It says "Order Completed", but I stil not yet received what I ordered. So I'm not happy!

Super godt sådan skal det være

Super godt sådan skal det være

Super godt sådan skal det være

ok

ok

ok