ESP32-CAM OV2640 Kamera Modülü İçin İndirme Altı Tahtası, Micro USB Arabirimli İncelemeleri - Banggood Türkiye Çevrimiçi Alışveriş

ESP32-CAM OV2640 Kamera Modülü İçin İndirme Altı Tahtası, Micro USB Arabirimli

US$9.21
~~US$7.49~~
Şimdi satın al

Müşteri Değerlendirmesi

3.75 üzerinden

4 incelemelerin tümünü görüntüle

5 yıldız
2 (50.0%)
4 yıldız
1 (25.0%)
3 yıldız
0 (0%)
2 yıldız
0 (0%)
1 yıldız
1 (25.0%)

Bir Değerlendirme Yaz Yayınlanan ilk 3 incelemeden biri senin incelemen olsun.2 kat Banggood puanı kazan!

Toplam (4) İnceleme
(0) Görüntü
(0) Video
Tüm Yıldızlar
- Tüm Yıldızlar(4)
- 5 Yıldız(2)
- 4 Yıldız(1)
- 3 Yıldız(0)
- 2 Yıldız(0)
- 1 Yıldız(1)

Göre sırala:

En İyi İnceleme

En İyi İnceleme
En Yararlı
En Son

Yalnızca ülkenizden yorumlar (Turkey)

|

Orjinali göster

İncelemenin bir kısmı otomatik olarak çevrildi.

SquizVIP3
AU
06/01/2024

Order received in good order and on the predicted date.

Order received in good order and on the predicted date.

Order received in good order and on the predicted date.
0

Yorumlar

Orjinali göster
tengucuVIP2
AU
31/05/2023

Very pleased with the boards.

Very pleased with the boards.

Very pleased with the boards.
0

Yorumlar

Orjinali göster
kezbarooVIP4
AU
02/10/2023

Works with windows and not so much with linux. Reset does not work with my particular cam boards, so I use the reset on the cam board

Works with windows and not so much with linux. Reset does not work with my particular cam boards, so I use the reset on the cam board

Works with windows and not so much with linux. Reset does not work with my particular cam boards, so I use the reset on the cam board
0

Yorumlar

Orjinali göster
RoberthVIP4
ZA
19/03/2024

When I tried to use this, it didn't work. It appears the Reset pin doesn't work at all. If I monitor the Comm port when connecting the ESP32 CAM, I have once seen the normal boot up procedure. But pushing the reset didn't put it through a reset - I didn't see anything on the Comm Port. When trying to upload a sketch, Arduino was unable to communicate. Holding down the IO0 button while booting didn't put it in program mode. Holding down the IO0 button and clicking the reset button didn't do anything. Possibly a faulty unit.

When I tried to use this, it didn't work. It appears the Reset pin doesn't work at all. If I monitor the Comm port when connecting the ESP32 CAM, I have once seen the normal boot up procedure. But pushing the reset didn't put it through a reset - I didn't see anything on the Comm Port. When trying to upload a sketch, Arduino was unable to communicate. Holding down the IO0 button while booting didn't put it in program mode. Holding down the IO0 button and clicking the reset button didn't do anything. Possibly a faulty unit.

When I tried to use this, it didn't work. It appears the Reset pin doesn't work at all. If I monitor the Comm port when connecting the ESP32 CAM, I have once seen the normal boot up procedure. But pushing the reset didn't put it through a reset - I didn't see anything on the Comm Port. When trying to upload a sketch, Arduino was unable to communicate. Holding down the IO0 button while booting didn't put it in program mode. Holding down the IO0 button and clicking the reset button didn't do anything. Possibly a faulty unit.
0

Yorumlar (1)

Orjinali göster

Show:

Toplam 0 sayfaları

Sayfaya git

Git

İlginizi çekebilir

recommendation for you