Müşteri Değerlendirmesi

4.92 üzerinden
Bir Değerlendirme Yaz
  • Toplam (221) İnceleme
  • (34) Görüntü
  • (0) Video
  • Tüm Yıldızlar
    • Tüm Yıldızlar(221)
    • 5 Yıldız(204)
    • 4 Yıldız(16)
    • 3 Yıldız(1)
    • 2 Yıldız(0)
    • 1 Yıldız(0)
Göre sırala:
En İyi İnceleme
  • En İyi İnceleme
  • En Yararlı
  • En Son
Yalnızca ülkenizden yorumlar (Turkey)
|
Orjinali göster

İncelemenin bir kısmı otomatik olarak çevrildi.

  • 28/01/2021

    Az előző vásárláson és próbán felbuzdulva vásároltam ezt a másodikat, mellyel egy újabb ledfüzér Wifi vezérlése lesz megoldva. Az utolsó képen a programozáshoz szükséges nyomógomb is látható az előző vásárlásból.

    Yorumlar
    Orjinali göster
  • 08/01/2021

    Az év végi rendelési idő ellenére 10 napon belül megérkezett. Furcsa módon nem házhoz jött, hanem a közelben lévő csomagpontra. Kedvező ár, jó minőség.

    Yorumlar
    Orjinali göster
  • 12/11/2020

    The description mentions a jumper next to the header.. there are no pins there as you might reasonably expect from the wording. Needs jumpers or switches soldered to the board for program and reset functions, else it's just a USB-serial bridge. Others have detailed this n their reviews of the programmer alone. I bodged some jumpers on for the sake of testing, as shown in the photo. Works welll. Will probably get a better programmer if I continue with the 01s and use this board as a PSU/Serial interface, which it will do nicely. The ESP-01 is decent. Better quality soldering than the "programmer". Four starts rather than three because at the time of writing, this bundle costs less than the ESP-01 or the programmer alone.

    Yorumlar
    Orjinali göster
  • 18/09/2020

    This is great, if you want to flash the ESP01 that comes with it solder in a switch and press it while inserting to PC.

    Yorumlar
    Orjinali göster
  • 30/03/2021

    ótimo produto muito bem embalado

    Yorumlar
    Orjinali göster
  • 28/12/2020

    Gyors szállítás! Próba később...

    Yorumlar
    Orjinali göster
  • 11/11/2020

    I soldered two sma tactile switches to the usb-serial adapter, this way it becames a programming adapter for PlatforIO or Arduino. To start programming mode, push and hold the IO0 switch and push the RST switch.

    Yorumlar
    Orjinali göster
  • 12/11/2020

    you need a jumper to set the programing mode, works well, the ESP01 module came with it was able to program and use on my Pixracer

    Yorumlar
    Orjinali göster
  • 17/01/2021

    parfait !

    Yorumlar
    Orjinali göster
  • 14/11/2020

    all complete arrived and it look like good

    Yorumlar
    Orjinali göster
Show:

    Toplam 0 sayfaları

    Sayfaya git

    Git

    İlginizi çekebilir

    recommendation for you
    • TRY43.46
    • TRY43.46
    • TRY78.30
    • TRY60.88
    • TRY78.30
    • TRY104.43
    • TRY78.30
    • TRY34.75
    • TRY60.88
    • TRY60.88
    • TRY34.75
    • TRY44.51
    • TRY69.59
    • TRY32.14
    • TRY78.30
    • TRY87.01
    • TRY69.59
    • TRY69.59