Müşteri Değerlendirmesi

4.81 üzerinden
Bir Değerlendirme Yaz
  • Toplam (441) İnceleme
  • (37) Görüntü
  • (3) Video
  • Tüm Yıldızlar
    • Tüm Yıldızlar(441)
    • 5 Yıldız(397)
    • 4 Yıldız(22)
    • 3 Yıldız(11)
    • 2 Yıldız(6)
    • 1 Yıldız(5)
Göre sırala:
En İyi İnceleme
  • En İyi İnceleme
  • En Yararlı
  • En Son
Yalnızca ülkenizden yorumlar (Turkey)
Orjinali göster

İncelemenin bir kısmı otomatik olarak çevrildi.

  • 27/12/2020

    Arrived well. Nice to build project. A template for LEDs is a must for succesfull Cube assembly. Take care it is common cathode cube connected to C1 - C8. Good quality. Reccomend.

    Orjinali göster
  • 08/05/2021

    good quality, good price Can not be compiled without a tamplate.

    Orjinali göster
  • 20/10/2020

    Thanks. The product has arrived in good condition. Usage follows ...

    Orjinali göster
  • 27/05/2021

    плата хорошего качества

    Orjinali göster
  • 20/12/2020

    Good item! LED's are transparent hard to see the light effect ...

    Orjinali göster
  • 18/10/2020

    awesome product

    Orjinali göster
  • 11/10/2020

    Everything is alright !

    Orjinali göster
  • 25/11/2016

    This is a great kit to improve your soldering skills. i have worked about 8 hours split over three days soldering the led grids, and this was great fun. Sadly my kit did not function. After a couple hours of troubleshooting, i noticed that the resistors R4 - R12 were 510 ohms in stead of the 220 ohms in the wiring diagram. I think they made a misstake during packing. colors are green, brown, brown. They should have been red, red, brown. of course. Since i am colorblind, i can imagine the misstake :) After replacing the correct resistors, the MCU still doesnt work. By manually pulling the resistors to ground, al the leds per segment light up. I think my STC12C5A60S2 has no code or is broken. Too bad.

    Yorumlar (1)
    Orjinali göster
  • 08/12/2017

    В самый раз для тех кто любит много пайки! Вот только мне забыли положить кабель питания ( не приятно) но не великая проблема есть блоки на 5 v. Шаблон делал сам не чего сложного размечал 15×15 мм. Шаблон у меня на ножках так мне показалось удобней ножки по 30мм. Всем удачной сборки!

    Orjinali göster
  • 27/09/2018

    this kit has everything necessary to build an 8x8x8 led cube. the printed circuit board is manufactured very well as per the Geekcreit standard. I will build it as soon as I have some free time. satisfied. questo kit ha tutto il necessario per costruire un cubo led 8x8x8. il circuito stampato è prodotto molto bene secondo lo standard Geekcreit. Lo costruirò non appena avrò del tempo libero. soddisfatto

    Yorumlar (1)
    Orjinali göster

    Toplam 0 sayfaları

    Sayfaya git


    İlginizi çekebilir

    recommendation for you
    • TRY40.85
    • TRY217.65
    • TRY252.49
    • TRY261.20
    • TRY888.27
    • TRY143.62
    • TRY322.16
    • TRY1,141.63
    • TRY130.55
    • TRY339.58
    • TRY147.97
    • TRY191.52
    • TRY69.59
    • TRY17.33
    • TRY191.52
    • TRY60.88
    • TRY85.27
    • TRY217.65