Müşteri Değerlendirmesi

Bir Değerlendirme Yaz
  • Toplam (1336) İnceleme
  • (156) Görüntü
  • (2) Video
  • Tüm Yıldızlar
    • Tüm Yıldızlar(1336)
    • 5 Yıldız(1277)
    • 4 Yıldız(44)
    • 3 Yıldız(14)
    • 2 Yıldız(1)
    • 1 Yıldız(0)
Göre sırala:
En İyi İnceleme
  • En İyi İnceleme
  • En Yararlı
  • En Son
Yalnızca ülkenizden yorumlar (Turkey)
|
Orjinali göster

İncelemenin bir kısmı otomatik olarak çevrildi.

  • 26/03/2017

    CNC Shield. This is a faithful copy of the V3.0 board produced by www.protoneer.co.nz There is some great info on this setup at http://blog.protoneer.co.nz/arduino-cnc-shield/ with a step by step at http://blog.protoneer.co.nz/arduino-cnc-shield-v3-00-assembly-guide/ One important thing - NEVER power up the board without there being stepper motors connected to each driver module. Failure to do this WILL destroy the driver modules.

    Yorumlar
    Orjinali göster
  • 09/12/2017

    os dejo unas fotos del cnc que me he construido

    Yorumlar
    Orjinali göster
  • 08/05/2019

    - Haute qualité 👍 - Emballage fin 📦 - Et reçu en moins de temps ⏰. Honnêtement la meilleure expérience de magasinage en ligne 😍 😘 👏👏

    Yorumlar
    Orjinali göster
  • 07/05/2017

    This is a good controller for CNC machines. Heatsinks have double sticking tape for placing them on top of chip. Drivers have no led to see if signal is present. I found solution of motors not responding by reading ALL reviews and one frenchman said there has to be a jumper at EN/GRD pins, close to button. No jumper in package so I made one. The drver chip gets very hot with stepper 42BYGH47-401A at .98V reading in driver. Have to tweack a lot and learn much more electronic theory to make it run well.

    Yorumlar
    Orjinali göster
  • 07/01/2019

    Purchased to run a GRBL build as a CNC router controller. Beware the pin alignment between the UNO, CNC shield and A4988 boards - i had to re-align some of the rows of header pins / sockets to allow the boards to assemble. Tested the UNO board - connects to the Arduino software and have downloaded a test program without issue. Note this board uses the CH340 USB-to-serial chip which is known to have an Rx buffer over-run issue with GRBL. On the CNC shield, the EN/X/Y/Z/A/5V headers (blue - top left) are not inserted all the way and are misaligned with the matching yellow headers - in my case a jumper won't fit to these without re-soldering. These headers are only used for development so i don't think it will matter initially. The shield is stamped as v3.00. The latest GRBL build (v1.1) and genuine Protoneer CNC shield (v3.51) have swapped the mapping of spindle enable and z-axis end stops; if using this shield with the latest GRBL the user needs to consider the implication of this. Solder quality seems fine across all boards. Entering into this project i was unaware of the specifics regarding the genuine vs. clone boards. I'll try these to see if they will work (i expect that they will) but i do so knowing that if they don't i'll be purchasing genuine boards to finish the build.

    Yorumlar
    Orjinali göster
  • 27/12/2017

    Good controller board for this price. Comes with arduino uno clone and stepper motor drivers. (and heatshink for drivers) Just need make motor-cable and burn grbl software to arduino and get a cnc controller. Arduino borad has excelent quality. Some drivers, and a shield comes with curved, crooked pins (maybe the shipment, post office handling badly.), but easy to fix this with a plier.

    Yorumlar
    Orjinali göster
  • 18/01/2017

    Packaging was good delivery time only 1 week. The product works very good no parts missing.

    Yorumlar
    Orjinali göster
  • 05/05/2020

    these boards will power the stepper motors (2) of my foam board cutter

    Yorumlar (1)
    Orjinali göster
  • 26/05/2018

    Alles was man braucht für eine Motorsteuerung. Gut verpackt und eine schnelle Lieferung. Prima

    Yorumlar
    Orjinali göster
  • Andriuz
    LT
    26/10/2017

    Good and useful. this is my second order for laser engraver.

    Yorumlar
    Orjinali göster
Show:

    Toplam 0 sayfaları

    Sayfaya git

    Git

    İlginizi çekebilir

    recommendation for you
    • US$989.00
    • US$34.99
    • US$699.00
    • US$469.00
    • US$339.00
    • US$63.99
    • US$29.99
    • US$25.99
    • US$60.99
    • US$44.72
    • US$44.99
    • US$22.99
    • US$16.99
    • US$18.91
    • US$9.99
    • US$11.99
    • US$18.70
    • US$59.99