This will not work with the newer FS i6s nor the Turnigy Evolution because they are not backwards compatible with older AFHDS. If you have a FS i6, you are OK. Just go into the menu and switch from AFHDS 2A to the AFHDS.

This will not work with the newer FS i6s nor the Turnigy Evolution because they are not backwards compatible with older AFHDS. If you have a FS i6, you are OK. Just go into the menu and switch from AFHDS 2A to the AFHDS.

This will not work with the newer FS i6s nor the Turnigy Evolution because they are not backwards compatible with older AFHDS. If you have a FS i6, you are OK. Just go into the menu and switch from AFHDS 2A to the AFHDS.

Don't let your color blind friend solder the wires . Now it's dead. Thanks Darcy.

Don't let your color blind friend solder the wires . Now it's dead. Thanks Darcy.

Don't let your color blind friend solder the wires . Now it's dead. Thanks Darcy.

It is a great receiver works great but the only bad thing it does not have failsafe even if you put failsafe in cleanflight or betaflight it wont do failsafe . If you fly mostly indoor it is ok but if you fly outdoors Well you may have a fly away . It is a good rx for indoor use for outside use it at your own risk .

It is a great receiver works great but the only bad thing it does not have failsafe even if you put failsafe in cleanflight or betaflight it wont do failsafe . If you fly mostly indoor it is ok but if you fly outdoors Well you may have a fly away . It is a good rx for indoor use for outside use it at your own risk .

It is a great receiver works great but the only bad thing it does not have failsafe even if you put failsafe in cleanflight or betaflight it wont do failsafe . If you fly mostly indoor it is ok but if you fly outdoors Well you may have a fly away . It is a good rx for indoor use for outside use it at your own risk .

Extremamente pequeno, leve (0.5g), 2.4 com 6 canais FlySky, compatível com FS-I6, TH9X GT2B, GT3, GT3B, GT3C, etc.Recomendo MUITO

Extremamente pequeno, leve (0.5g), 2.4 com 6 canais FlySky, compatível com FS-I6, TH9X GT2B, GT3, GT3B, GT3C, etc.Recomendo MUITO

Extremamente pequeno, leve (0.5g), 2.4 com 6 canais FlySky, compatível com FS-I6, TH9X GT2B, GT3, GT3B, GT3C, etc.Recomendo MUITO

I am using it with FlySky FS-T6 and Eachine Tiny 32bits F3 Brushed Flight Control Board. There was no problem to pair. Я використовую цей приймач з пультом керування FlySky FS-T6 та контролером Eachine Tiny 32bits F3 . Мені вдалося “спарувати“ їх без жодних порблем.

I am using it with FlySky FS-T6 and Eachine Tiny 32bits F3 Brushed Flight Control Board. There was no problem to pair. Я використовую цей приймач з пультом керування FlySky FS-T6 та контролером Eachine Tiny 32bits F3 . Мені вдалося “спарувати“ їх без жодних порблем.

I am using it with FlySky FS-T6 and Eachine Tiny 32bits F3 Brushed Flight Control Board. There was no problem to pair. Я використовую цей приймач з пультом керування FlySky FS-T6 та контролером Eachine Tiny 32bits F3 . Мені вдалося “спарувати“ їх без жодних порблем.

range is good, I bought a Flysky i10 just for my 80 to 110mm builds because of the ultra micro RX that can be had for them on the Flysky protocol. My wife flies a Spektrum DX18QQ as her main radio and I fly a Graupner MZ24 pro and a MC32 radio I love the Graupner Hott radios but they are not making ultra tiny RX's that are needed for tiny quads. This RX has plenty of range for your little brushed Micro quads and I have tested them to 300 meters with no issues and no dropouts BUT this RX has NO FAILSAFE so keep that in mind when you are flying if you have a drop out its just going to keep repeating the same PPM signal and you will have a fly away, I have yet to have a single drop out and have had well over 2000 flights on all my different burshed micros and all of them run this RX.

range is good, I bought a Flysky i10 just for my 80 to 110mm builds because of the ultra micro RX that can be had for them on the Flysky protocol. My wife flies a Spektrum DX18QQ as her main radio and I fly a Graupner MZ24 pro and a MC32 radio I love the Graupner Hott radios but they are not making ultra tiny RX's that are needed for tiny quads. This RX has plenty of range for your little brushed Micro quads and I have tested them to 300 meters with no issues and no dropouts BUT this RX has NO FAILSAFE so keep that in mind when you are flying if you have a drop out its just going to keep repeating the same PPM signal and you will have a fly away, I have yet to have a single drop out and have had well over 2000 flights on all my different burshed micros and all of them run this RX.

range is good, I bought a Flysky i10 just for my 80 to 110mm builds because of the ultra micro RX that can be had for them on the Flysky protocol. My wife flies a Spektrum DX18QQ as her main radio and I fly a Graupner MZ24 pro and a MC32 radio I love the Graupner Hott radios but they are not making ultra tiny RX's that are needed for tiny quads. This RX has plenty of range for your little brushed Micro quads and I have tested them to 300 meters with no issues and no dropouts BUT this RX has NO FAILSAFE so keep that in mind when you are flying if you have a drop out its just going to keep repeating the same PPM signal and you will have a fly away, I have yet to have a single drop out and have had well over 2000 flights on all my different burshed micros and all of them run this RX.

Had it connected to the Eachine 32bits F3 Brudhed Flight Control Board, checked PPM signal in Betafilght, successfully paired with my Turnigy 9X running Er9x firmware. Only drawbak is that it doesn't have Failsafe, but for a micro quadcopter I guess you don't really need it if you are just flying indoors.

Had it connected to the Eachine 32bits F3 Brudhed Flight Control Board, checked PPM signal in Betafilght, successfully paired with my Turnigy 9X running Er9x firmware. Only drawbak is that it doesn't have Failsafe, but for a micro quadcopter I guess you don't really need it if you are just flying indoors.

Had it connected to the Eachine 32bits F3 Brudhed Flight Control Board, checked PPM signal in Betafilght, successfully paired with my Turnigy 9X running Er9x firmware. Only drawbak is that it doesn't have Failsafe, but for a micro quadcopter I guess you don't really need it if you are just flying indoors.

pairing was weird... It would never say pairing successful, but when i turn it on it was paired anyway. Turn off AFHDS2 on the transmitter. Range is better than expected, but you can have a flyaway when you lose signal because the ppm then just repeats the last values. If it just stopped sending ppm then it could be handled by the failsave of betaflight, can't be that hard to implement. I would even pay some $ more for that functionality. This is really relevant for safety.

pairing was weird... It would never say pairing successful, but when i turn it on it was paired anyway. Turn off AFHDS2 on the transmitter. Range is better than expected, but you can have a flyaway when you lose signal because the ppm then just repeats the last values. If it just stopped sending ppm then it could be handled by the failsave of betaflight, can't be that hard to implement. I would even pay some $ more for that functionality. This is really relevant for safety.

pairing was weird... It would never say pairing successful, but when i turn it on it was paired anyway. Turn off AFHDS2 on the transmitter. Range is better than expected, but you can have a flyaway when you lose signal because the ppm then just repeats the last values. If it just stopped sending ppm then it could be handled by the failsave of betaflight, can't be that hard to implement. I would even pay some $ more for that functionality. This is really relevant for safety.

seems great and useful for my Flysky fsi6 but i'm unable to bind it. i have try everything.

seems great and useful for my Flysky fsi6 but i'm unable to bind it. i have try everything.

seems great and useful for my Flysky fsi6 but i'm unable to bind it. i have try everything.

Muito sensível, extremamente pequeno, fácil de bind, flysky PPM. PRÓS: minusculo, muito sensível (cheguei a a 105 m usando um iRX-IR8M), muito bem acabado, acompanha termocontrátil para proteção CONTRAS: antena fixa, podeira ser um pouco maior elevando a sensibilidade, só tem padrão PPM Recomendo muito

Muito sensível, extremamente pequeno, fácil de bind, flysky PPM. PRÓS: minusculo, muito sensível (cheguei a a 105 m usando um iRX-IR8M), muito bem acabado, acompanha termocontrátil para proteção CONTRAS: antena fixa, podeira ser um pouco maior elevando a sensibilidade, só tem padrão PPM Recomendo muito

Muito sensível, extremamente pequeno, fácil de bind, flysky PPM. PRÓS: minusculo, muito sensível (cheguei a a 105 m usando um iRX-IR8M), muito bem acabado, acompanha termocontrátil para proteção CONTRAS: antena fixa, podeira ser um pouco maior elevando a sensibilidade, só tem padrão PPM Recomendo muito