I bought the Q61 frame to convert the MN77 over to a leaf spring style rear suspension. My MN77 rear suspension did not work well and I didn't like how the axles were positioned. This was a pretty easy swap. I also cut about 20mm off of the rear of the Q61 frame and moved the bed forward while removing the spare tire carrier. I think this makes a much neater looking truck. This also improves the departure angle for crawling. I did the same thing to the B24, see pictures below. The B24 is a crawling machine now! I also installed the metal differentials, the 2 speed metal gear transfer case and the metal driveshafts. I used the racerstar 2430 5800kv motor in the B24. This is a little too high kv for this unit, it does not slow down enough to crawl really well. But it is pretty fast! I would recommend the 4000kv 2435 or 40 motor instead.

I bought the Q61 frame to convert the MN77 over to a leaf spring style rear suspension. My MN77 rear suspension did not work well and I didn't like how the axles were positioned. This was a pretty easy swap. I also cut about 20mm off of the rear of the Q61 frame and moved the bed forward while removing the spare tire carrier. I think this makes a much neater looking truck. This also improves the departure angle for crawling. I did the same thing to the B24, see pictures below. The B24 is a crawling machine now! I also installed the metal differentials, the 2 speed metal gear transfer case and the metal driveshafts. I used the racerstar 2430 5800kv motor in the B24. This is a little too high kv for this unit, it does not slow down enough to crawl really well. But it is pretty fast! I would recommend the 4000kv 2435 or 40 motor instead.

I bought the Q61 frame to convert the MN77 over to a leaf spring style rear suspension. My MN77 rear suspension did not work well and I didn't like how the axles were positioned. This was a pretty easy swap. I also cut about 20mm off of the rear of the Q61 frame and moved the bed forward while removing the spare tire carrier. I think this makes a much neater looking truck. This also improves the departure angle for crawling. I did the same thing to the B24, see pictures below. The B24 is a crawling machine now! I also installed the metal differentials, the 2 speed metal gear transfer case and the metal driveshafts. I used the racerstar 2430 5800kv motor in the B24. This is a little too high kv for this unit, it does not slow down enough to crawl really well. But it is pretty fast! I would recommend the 4000kv 2435 or 40 motor instead.

schlecht verpackt, Rahmen verbogen, Rücklichter abgebrochen

schlecht verpackt, Rahmen verbogen, Rücklichter abgebrochen

schlecht verpackt, Rahmen verbogen, Rücklichter abgebrochen