Müşteri Değerlendirmesi

Bir Değerlendirme Yaz
  • Toplam (270) İnceleme
  • (41) Görüntü
  • (3) Video
  • Tüm Yıldızlar
    • Tüm Yıldızlar(270)
    • 5 Yıldız(257)
    • 4 Yıldız(11)
    • 3 Yıldız(2)
    • 2 Yıldız(0)
    • 1 Yıldız(0)
Göre sırala:
En İyi İnceleme
  • En İyi İnceleme
  • En Yararlı
  • En Son
Yalnızca ülkenizden yorumlar (Turkey)
|
Orjinali göster

İncelemenin bir kısmı otomatik olarak çevrildi.

  • 01/11/2016

    Отличная рама, сам пластик и штамповка ровные и качественные. Моторчик входит без проблем и сидит плотно. На нижней стороне "ножки" мягкие, силиконовые - довольно упругие Дождусь контроллер и в полет!

    Yorumlar
    Orjinali göster
  • 22/01/2017

    I did not like the induct system on the Eachine Bumble bee 95, so I got this king kong 100 frame transferred everything over from the bumble bee, including the canopy, minus the props, I bought some 3 blade props to use and the thing soooooo much better with this setup.

    Yorumlar
    Orjinali göster
  • 21/08/2019

    Light enough, and maybe more durable than Carbon fiber. I built mine as just a flyer without FPV. First I set it up with a simple Blade Nano QX board, but later I swapped it for a Beecore F3 EVO Acro board so I could fly stunts. Part of the motor is enclosed in housings, so watch motor temps (reduced air cooling). Plenty of room for 65mm props. I set mine up a bit differently than Bang Good shows, with my battery slung underneath. .. See photos. If I mount a cam later, I'll use an Eachine TX01S or similar, with the cam up front and the separate VTX mounted on the tail.

    Yorumlar
    Orjinali göster
  • beppe
    IT
    01/04/2017

    ottimo frame per mini quad FPV con motori 8x20

    Yorumlar
    Orjinali göster
  • 31/01/2018

    Now i have 6x of these King Kong Q100 micro racer. They are extremely durable frame, smashed, wacked and bashed like no tomorrow and still holding well with minor chips, scraps or cracked around the rotor placeholder which can easily fix with glue or zip ties. Easy to to add flight controller, FPV units in any configuration with or without canopy. The are also hansomely looks goodsin apppearance, some people mistakenly identify it as baby DJI Spark, lol.

    Yorumlar
    Orjinali göster
  • 06/02/2017

    It arrived very well with time and in excellent conditions, the product fulfills all its functions mentioned, 100% recommended for the projects and products made.

    Yorumlar
    Orjinali göster
  • 28/01/2017

    nickel, livraison rapide et très bien emballer. matériel irréprochable et site a conseiller.

    Yorumlar
    Orjinali göster
  • 08/11/2020

    Very nice to build brushed drone. It is very light and has enough space for parts. It has a little technical difficulty for deciding units... fc, cam, vtx etc...

    Yorumlar (2)
    Orjinali göster
  • 04/11/2016

    This is a very cool diy frame, you can build an qx90 or qx95 on to this frame. The cam hole is a little tight and needs cutting. But the strength of the frame feels nice, also do the little rubber knobs on the landing gear.

    Yorumlar
    Orjinali göster
  • 06/06/2019

    Delivery on expected time to India, Build quality is good, very fulfilled

    Yorumlar
    Orjinali göster
Show:

    Toplam 0 sayfaları

    Sayfaya git

    Git
    recommendation for you
    • US$22.99
    • US$9.99
    • US$58.58
    • US$20.68
    • US$7.04
    • US$27.10
    • US$14.95
    • US$8.11
    • US$12.44
    • US$119.99
    • US$27.91
    • US$11.99
    • US$58.99
    • US$15.99
    • US$7.99
    • US$8.99
    • US$7.99
    • US$40.99