Müşteri Değerlendirmesi

Bir Değerlendirme Yaz
  • Toplam (134) İnceleme
  • (22) Görüntü
  • (0) Video
  • Tüm Yıldızlar
    • Tüm Yıldızlar(134)
    • 5 Yıldız(123)
    • 4 Yıldız(11)
    • 3 Yıldız(0)
    • 2 Yıldız(0)
    • 1 Yıldız(0)
Göre sırala:
En İyi İnceleme
  • En İyi İnceleme
  • En Yararlı
  • En Son
Yalnızca ülkenizden yorumlar (Turkey)
|
Orjinali göster

İncelemenin bir kısmı otomatik olarak çevrildi.

  • 25/06/2016

    I have used these mounts on all my drones. Sometimes on back and front. They fit on all the LS Frames. LS-210, 180, 150, 130 no drilling just use longer screws and mount them through the frame into the upright posts. Perfect fit. They hold the standard led light strips. I usually sand mine a little so the led lights sticky tape or glue holds better and don't fall off. These fit on zmr and qav frames same using the stock mounting holes and upright screws. Just use longer screws and all set. Price on Banggood is excellent compared to ebay so I buy here. The only bad thing is they break. I have broken 3 so far. The 3D printed plastic no matter what it is, is just more brittle. I wish they would make a better plastic when 3D printing. Anything 3D printed with this plastic on a drone I usually end up breaking in a crash. So that is the only bad part. The good part is super glue sticks to this plastic really good and fixes them fast and pretty good. I haven't broken any rear mounts off but my front mounts 3x times now I have broken those. Crashing hitting stuff etc. they crack and break off. Led light holds them so I just super glue them back on. darn. But pretty cool. I will include some pics of mine showing them mounted on several different drones. These mount up fast and easy and work great. Here is a Robocat, LS-210, LS180, ZMR250 etc.

    Yorumlar
    Orjinali göster
  • 21/07/2016

    I ordered it because I wanted a led holder for my Lantian 210 and this one should work. I received it and try to fit them into the aluminium posts, but no cigar ! It only fits because the distance between them right, but the holes on the holder are not round.. You need to file a lot to make them round and fit the LS-210 ! After a bit of work, it fits and works wonderfully !

    Yorumlar
    Orjinali göster
  • 02/05/2017

    I have used this mount for my RealAcc 210 model but in reality this can fit most quad builds. I put on it a Matek LED (from Banggood as well) and just drilled in it to use plastic screws. Worked a treat! Definitely recommended.

    Yorumlar
    Orjinali göster
  • 21/11/2016

    The mount is well designed with plenty of surface area for adequate double sided tape for a very secure way of mounting LED light bars on your quad. The density of the material, supports and mounting surfaces are a sign of very good 3d printing practices ... it really is a quality part.

    Yorumlar
    Orjinali göster
  • 12/08/2016

    Пришло очень быстро до Москвы , за полторы недели. Обычный кронштейн для стопсигналов дрона.

    Yorumlar
    Orjinali göster
  • 26/06/2016

    nice 3d print quality great for fitting leds to ZMR250

    Yorumlar
    Orjinali göster
  • 26/06/2017

    el producto llegó bastante rápidosin inconvenientes y en buen estado

    Yorumlar
    Orjinali göster
  • 06/04/2017

    A lyukakat kijjebb kell faragni egy kicsit, és nem ért akkorára fel fúrni hogy az oszlopokra lehessen rá húzni, majd így fel ragasztani, mivel másként a 250 vázra nem igen szerelhető fel.

    Yorumlar
    Orjinali göster
  • 10/10/2016

    Useful to fix leds on quad with 3M tape to hang cat

    Yorumlar
    Orjinali göster
  • 07/05/2016

    Works on ZMR almost any 250 usual frame,

    Yorumlar
    Orjinali göster
Show:

    Toplam 0 sayfaları

    Sayfaya git

    Git
    recommendation for you
    • TRY134.36
    • TRY713.99
    • TRY97.69
    • TRY195.49
    • TRY195.49
    • TRY183.27
    • TRY207.72
    • TRY855.69
    • TRY183.27
    • TRY158.81
    • TRY73.23
    • TRY244.40
    • TRY48.78
    • TRY85.46
    • TRY85.46
    • TRY97.69
    • TRY843.47
    • TRY1,454.76