MATEKSYS CRSF-PWM-C CRSF'den PWM Dönüştürücüsü 10 PWM 50-400Hz Çıkışı 2 UART İçindeki Dahili Akım Sensörü Güvenli Olmayan Otomatik Ayar için RC Alıcısı İncelemeleri

MATEKSYS CRSF-PWM-C CRSF'den PWM Dönüştürücüsü 10 PWM 50-400Hz Çıkışı 2 UART İçindeki Dahili Akım Sensörü Güvenli Olmayan Otomatik Ayar için RC Alıcısı

US$16.99

Şimdi satın al

Müşteri Değerlendirmesi

5 üzerinden

7 incelemelerin tümünü görüntüle

5 yıldız
7 (100.0%)
4 yıldız
0 (0%)
3 yıldız
0 (0%)
2 yıldız
0 (0%)
1 yıldız
0 (0%)

Bir Değerlendirme Yaz Yayınlanan ilk 3 incelemeden biri senin incelemen olsun.2 kat Banggood puanı kazan!

Toplam (7) İnceleme
(3) Görüntü
(0) Video
Tüm Yıldızlar
- Tüm Yıldızlar(7)
- 5 Yıldız(7)
- 4 Yıldız(0)
- 3 Yıldız(0)
- 2 Yıldız(0)
- 1 Yıldız(0)

Göre sırala:

En İyi İnceleme

En İyi İnceleme
En Yararlı
En Son

Yalnızca ülkenizden yorumlar (Turkey)

Orjinali göster

İncelemenin bir kısmı otomatik olarak çevrildi.

DANIELVIP4
SK
03/12/2021

At this moment tested only on-board and outside. Tested with MATEK ELRS-R24-D flashed with ELRS 2.0.0RC3, CRSF-PWM-C also flashed with actual FW from MATEK`s website. Works fine except GPS: refresh rate of GPS is only 1Hz and can see some drop-outs on GPS data. Other sensors work OK, would be fine to upgrade this board also with baro, but at this moment this option is not supported. Also could be useful to remap ELRS channel 11 or 12 to PWM5: channel 5 /PWM5 is at this moment only 2- stage. Conclusion: very good 10-channel receiver subboard. Good dimensions even compared to classic 8-channel receiver.Satisfied.

At this moment tested only on-board and outside. Tested with MATEK ELRS-R24-D flashed with ELRS 2.0.0RC3, CRSF-PWM-C also flashed with actual FW from MATEK`s website. Works fine except GPS: refresh rate of GPS is only 1Hz and can see some drop-outs on GPS data. Other sensors work OK, would be fine to upgrade this board also with baro, but at this moment this option is not supported. Also could be useful to remap ELRS channel 11 or 12 to PWM5: channel 5 /PWM5 is at this moment only 2- stage. Conclusion: very good 10-channel receiver subboard. Good dimensions even compared to classic 8-channel receiver.Satisfied.

At this moment tested only on-board and outside. Tested with MATEK ELRS-R24-D flashed with ELRS 2.0.0RC3, CRSF-PWM-C also flashed with actual FW from MATEK`s website. Works fine except GPS: refresh rate of GPS is only 1Hz and can see some drop-outs on GPS data. Other sensors work OK, would be fine to upgrade this board also with baro, but at this moment this option is not supported. Also could be useful to remap ELRS channel 11 or 12 to PWM5: channel 5 /PWM5 is at this moment only 2- stage. Conclusion: very good 10-channel receiver subboard. Good dimensions even compared to classic 8-channel receiver.Satisfied.
1

Yorumlar

Orjinali göster
LZ1DBZVIP3
BG
10/05/2022

I plan to use it on one of the rc car, in combination with happymodel ep1

I plan to use it on one of the rc car, in combination with happymodel ep1

I plan to use it on one of the rc car, in combination with happymodel ep1
0

Yorumlar

Orjinali göster