Müşteri Değerlendirmesi

4.82 üzerinden
Bir Değerlendirme Yaz
  • Toplam (154) İnceleme
  • (26) Görüntü
  • (3) Video
  • Tüm Yıldızlar
    • Tüm Yıldızlar(154)
    • 5 Yıldız(131)
    • 4 Yıldız(21)
    • 3 Yıldız(1)
    • 2 Yıldız(0)
    • 1 Yıldız(1)
Göre sırala:
En İyi İnceleme
  • En İyi İnceleme
  • En Yararlı
  • En Son
Yalnızca ülkenizden yorumlar (Turkey)
|
Orjinali göster

İncelemenin bir kısmı otomatik olarak çevrildi.

  • 23/02/2021

    facile à monter et à démonter grave sur une grande surface 33cmx19cm le logiciel est facile d'utilisation j'adore le mode wifi juste comme tous les graveurs, il faut bien faire ses réglages avant de lancer la gravure. test sur coque d'iphone, alu et même le verre ça fonctionne par contre il faut noircir les matériaux afin de les graver et même faire plusieurs passe si besoin.(laser 20w électrique -5.5w optique) test sur la découpe du bois de faible épaisseur , du papier, du carton et même sur une feuille de joint pour refaire des joints de culasse motoculture le tout sans problème. par contre ne vous attendez pas à faire des paysages où même des visages en 5 minutes, il faut du temps beaucoup de temps , tout dépends aussi la taille du dessin.

    Yorumlar
    Orjinali göster
  • 08/01/2021

    Super Gerät, leicht zu bedienen und sehr gut zum gravieren von eloxiertem Aluminium geeignet. Ich bin begeistert. Tip: immer richtig Fokussieren dann klappt auch so einiges echt gut

    Yorumlar (2)
    Orjinali göster
  • 19/03/2021

    Teslimat çok hızlı, sadece 9 gün. lazer vaat ettiği herşeyi yapıyor. 2mm kontrplak kestim sıkıntı yok. yazma hızı ve kalitesi çok iyi. programı tam manasıyla çözemedim daha. dışarıdan kesme dosyalarını nasıl izleyeceğim bulamadım.

    Yorumlar (7)
    Orjinali göster
  • 05/01/2021

    super comme d'écrit reste a l'essayer...livraison au canada 4 jour ..mais essayer prendre autre que poste canada il l'avait depuis 1 mois et 3 jour ..que dire du service a clientèle excellente..45 minute pour l'assemblée

    Yorumlar (1)
    Orjinali göster
  • 28/10/2020

    Although proccesing time was a bit high (ordered Oct 4th and shipped Oct 15th) it tooks 13 days to arrive only. No import duties were applied fortunately. BG order team contacted me by email and solve the problem with shipping method. Satisfied. The engraver came well packet, inserted in foam. All parts complete, no damages. The only improvement point can be add an anti-static bag/foam to the controller board. Still pending assembly and first testing. Construction and materials looks robust and there is no signs of wobbling. I bought it cause wireless and standalone operation options. It comes with GRBL 1.1 firmware but can not be used directly with third party software (Lightburn, LaserGRBL, etc) but propietary Vigotec VigoWorks software only instead becasue the ESP32-WROOM has propietary firmware to connect to the CH330N USB interface chip and to the Atmel 328P procesor. However an small modification in the controller board can be done easily to make it compatible :-), using a 4PDT switch and small soldering to allow switch the board between Vigotec mode and third party software mode compatible.

    Yorumlar (4)
    Orjinali göster
  • 20/11/2020

    Une très bonne machine, très précise, dommage qu'elle soit captive du logiciel VigoWorks : bien mais pas optimum Fonctionne bien en Wifi (un peu plus compliqué en W10), fonctionne bien en SD (mais un seul fichier GCode sur la carte SD) et fonctionne aussi en USB Le ventilateur du laser 20w est plutôt bruyant

    Yorumlar
    Orjinali göster
  • 26/03/2021

    güzel ürün, metale baskı biraz uzun sürüyor. en az 20w almanızda fayda var

    Yorumlar (1)
    Orjinali göster
  • 29/10/2020

    Recebí muito rápido, veio tudo certo e é um ótimo produto. Gostei muito!

    Yorumlar (8)
    Orjinali göster
  • 17/05/2021

    My laser arrived today, 10 days after ordering, I am lmpressed with the delivery speed. The machine was easy to put together and was up and running within a hour of me snatching it out of postie's hands and scuttling off to the workshop. The software is easy to navigate and there is a good choice of connectivity, USB, WiFi, WiFi Hotspot and SD card so there is something for every one. I mported a picture of my daughter's horse and lasered it on to a piece of Maple faced ply. The results are very pleasing for a first attempt. I can highly recommend the VigoTec VG-LX7 as a well priced entry level laser engraver that punches above it's weight....

    Yorumlar
    Orjinali göster
  • 03/11/2020

    Very good nagyon jó Időben megérkezett Gyönyörűen vág

    Yorumlar
    Orjinali göster
Show:

    Toplam 0 sayfaları

    Sayfaya git

    Git

    İlginizi çekebilir

    recommendation for you
    • TRY2,437.32
    • TRY2,002.07
    • TRY1,653.87
    • TRY1,584.23
    • TRY1,479.77
    • TRY1,836.68
    • TRY1,131.57
    • TRY2,176.17
    • TRY3,516.75
    • TRY1,688.69
    • TRY1,671.28
    • TRY2,872.57
    • TRY3,046.68
    • TRY2,245.81
    • TRY2,924.81
    • TRY1,044.52
    • TRY1,479.77
    • TRY400.34