Using the XY-SK35 as replacement for wall-warts for single board computers in combination with old laptop adapters. Made a console-enclosure with a 3D-printer to make it more accessible and user-friendly.

Using the XY-SK35 as replacement for wall-warts for single board computers in combination with old laptop adapters. Made a console-enclosure with a 3D-printer to make it more accessible and user-friendly.

Using the XY-SK35 as replacement for wall-warts for single board computers in combination with old laptop adapters. Made a console-enclosure with a 3D-printer to make it more accessible and user-friendly.

Just received the SK35. I have not had much time on it but it seems to work well. I used it as a battery eliminator for a single cell LiPo powered mini PC(Gole1). The Gole1 current draw was typically well under 1.6 amps(~.56A@idle). I connected the SK35 output to the Gole1's battery input connector. The SK35 ran fairly cool under that load. Supplied the SK35 with a 19.5V laptop power supply, set volts out to 4.7, set outgoing current limit to 3 amps. Ran it in CV for this application. The SK35 retains the setting, even when the laptop power supply is removed. Overall pretty nice gadget. Ultimately, I will place the SK35 in to an enclosure with banana plugs, should be a pretty nice little bench supply. Delivery was a little long(90 days) due to the Covid factor. If you want it faster , you may want to choose a faster shipping option. Thanks Banggood.

Just received the SK35. I have not had much time on it but it seems to work well. I used it as a battery eliminator for a single cell LiPo powered mini PC(Gole1). The Gole1 current draw was typically well under 1.6 amps(~.56A@idle). I connected the SK35 output to the Gole1's battery input connector. The SK35 ran fairly cool under that load. Supplied the SK35 with a 19.5V laptop power supply, set volts out to 4.7, set outgoing current limit to 3 amps. Ran it in CV for this application. The SK35 retains the setting, even when the laptop power supply is removed. Overall pretty nice gadget. Ultimately, I will place the SK35 in to an enclosure with banana plugs, should be a pretty nice little bench supply. Delivery was a little long(90 days) due to the Covid factor. If you want it faster , you may want to choose a faster shipping option. Thanks Banggood.

Just received the SK35. I have not had much time on it but it seems to work well. I used it as a battery eliminator for a single cell LiPo powered mini PC(Gole1). The Gole1 current draw was typically well under 1.6 amps(~.56A@idle). I connected the SK35 output to the Gole1's battery input connector. The SK35 ran fairly cool under that load. Supplied the SK35 with a 19.5V laptop power supply, set volts out to 4.7, set outgoing current limit to 3 amps. Ran it in CV for this application. The SK35 retains the setting, even when the laptop power supply is removed. Overall pretty nice gadget. Ultimately, I will place the SK35 in to an enclosure with banana plugs, should be a pretty nice little bench supply. Delivery was a little long(90 days) due to the Covid factor. If you want it faster , you may want to choose a faster shipping option. Thanks Banggood.

非常に良いです

非常に良いです

非常に良いです

最高です！

最高です！

最高です！

working well

working well

working well

received in good condition. not tested

received in good condition. not tested

received in good condition. not tested

All good

All good

All good

top

top

top

Muito bom e o acabamento é ótimo.

Muito bom e o acabamento é ótimo.

Muito bom e o acabamento é ótimo.

Nice universal charging module. With higher currents it may get pretty hot. I was curious what is under heat sink and found out there is no thermal paste so I applied some. It doesn't lower the temperatures significantly but it will improve thermal dissipation from semiconductors to heat sink.

Nice universal charging module. With higher currents it may get pretty hot. I was curious what is under heat sink and found out there is no thermal paste so I applied some. It doesn't lower the temperatures significantly but it will improve thermal dissipation from semiconductors to heat sink.

Nice universal charging module. With higher currents it may get pretty hot. I was curious what is under heat sink and found out there is no thermal paste so I applied some. It doesn't lower the temperatures significantly but it will improve thermal dissipation from semiconductors to heat sink.