Müşteri Değerlendirmesi

Bir Değerlendirme Yaz
  • Toplam (40) İnceleme
  • (6) Görüntü
  • (0) Video
  • Tüm Yıldızlar
    • Tüm Yıldızlar(40)
    • 5 Yıldız(35)
    • 4 Yıldız(3)
    • 3 Yıldız(2)
    • 2 Yıldız(0)
    • 1 Yıldız(0)
Göre sırala:
En İyi İnceleme
  • En İyi İnceleme
  • En Yararlı
  • En Son
Yalnızca ülkenizden yorumlar (Turkey)
Orjinali göster

İncelemenin bir kısmı otomatik olarak çevrildi.

  • 12/10/2020

    All about smart home "SONOFF"

    Yorumlar (1)
    Orjinali göster
  • 21/01/2021

    ottimo arrivato in tempi brevi , davvero soddisfatto , appena posso lo metto in opera

    Orjinali göster
  • 25/01/2021

    good product

    Orjinali göster
  • 24/11/2020

    ottimi prodotti, spedizione veloce!

    Orjinali göster
  • 31/10/2020

    Ok consegnati

    Orjinali göster
  • 28/10/2020


    Orjinali göster
  • 29/04/2021

    Works really well, but be aware that sometimes the included batteries are flat, I've had to replace two batteries out of the box. The scenes feature in the app could also be a lot better. It doesn't allow for very varied setups, so for example, if you want the switch to turn off the lights as well as turn them on, you have to assign on to click and off to double click, there doesn't seem to be a way to say : if light is on and click is pushed then turn off, the functionality is very basic.

    Orjinali göster
  • 23/04/2021

    Sonoff devices and hub and excellent value for money.all are easy to pair and use. However, the PIRs are pretty much useless, the only Sonoff item that is not very good. It will suddenly stop detecting movement for no reason, and then you have a fight on to get it paired again. if you look online, this is a known issue with this PIR. Other than the PIR, the rest of the equipment is well worth the money.

    Yorumlar (1)
    Orjinali göster
  • 31/03/2021

    These are small devices, all of which are powered by 2450 button cells, except for the ZigBee bridge. The bridge is not much bigger than a typical UK domestic plug, and needs a USB supplied source of power (my only dislike). First pair the bridge with the eWeLink app, then add each sensor as a subdevice to the bridge. I haven't used the wireless switch, but have set up the motion sensor, door switch and temperature sensor. Then I set up a scene to trigger a sonoff Basic WiFi switch (I already had) when the motion sensor picks up movement. Easy peasy. Interestingly the door switch and temperature sensor appear in the Google Home app, but the UI does not show the open/closed status or the temperature and humidity like the eWeLink app does. However, Voice commands to the Google Assistant do yield this information.

    Orjinali göster
  • 25/08/2021

    bridge, temperature and switch works as expected but motion detection is not stable and disconnected most of the time without option to reactivate, unless delete from the configuration and re-install.

    Orjinali göster

    Toplam 0 sayfaları

    Sayfaya git


    İlginizi çekebilir

    recommendation for you
    • TRY133.72
    • TRY62.35
    • TRY124.80
    • TRY166.45
    • TRY138.18
    • TRY160.48
    • TRY71.27
    • TRY151.56
    • TRY222.92
    • TRY321.05