Müşteri Değerlendirmesi

4.96 üzerinden
Bir Değerlendirme Yaz
  • Toplam (26) İnceleme
  • (4) Görüntü
  • (0) Video
  • Tüm Yıldızlar
    • Tüm Yıldızlar(26)
    • 5 Yıldız(25)
    • 4 Yıldız(1)
    • 3 Yıldız(0)
    • 2 Yıldız(0)
    • 1 Yıldız(0)
Göre sırala:
En İyi İnceleme
  • En İyi İnceleme
  • En Yararlı
  • En Son
  • November-12 2020 11:37:57

    Arrivata in soli 4 giorni dall'ordine, l'imballaggio è molto robusto è ordinato, ci sono molti accessori che non pensavo di trovare nel kit. a sorpresa ho trovato i cuscinetti lineari in metallo, pensavo che arrivasse con quelli di plastica come in foto. anche le rotelle di regolazione del piatto sono già maggiorate. come primo pezzo ho stampato il file di esempio presente nella chiavetta usb con tutti i settaggi originali, e devo dire che sono rimasto sorpreso della qualità, senza aver fatto

    Yorumlar
  • June-15 2020 15:34:24

    Great printer. You will have a lot to learn when you set it up. I promise you! join the face book group for Tronxy printers, you WILL need to adjust the firmware to get it to print at any speed or quality. mine came with the wrong firmware installed and the extruder ran backwards, the filament was only 1/10 extruding and the Esteps were just wrong. you can download the firmware from the tronxy web page but I suggest using the facebook page for any help you need. I'm on there every day just about.

    Yorumlar
  • June-03 2020 13:19:38

    Arrivata 3 giorni in anticipo rispetto alla data prevista. L'articolo è esattamente come da descrizione. Ho riscontrato solo 2 piccole imperfezioni di fabricazione non imputabili a Banggood. 1" foro del sensore del filamento ostruito da sbavature di plastica del guscio. 2" cavetto del display schiacciato tra le lamiere del contenitore della scheda madre. il tutto facilmente risolvibile smontando e riposizionando. premetto che sono alla prima esperienza con la stampa 3D. le prime 2 stampe non sono

    Yorumlar
  • September-04 2020 06:18:22

    HOLA ME LLEGO UNA PIEZA ROTA ADJUNTO FOTO Y RUEGO ME LA ENVIEN LO ANTES POSIBLE. TB QUIERO SABER QUE SE PUEDE ACER PARA QUE PEGUE BIEN EL FILAMENTO EN LA BASE PUES DEJA MUCHAS PELOTILLAS E IMPERFECCIONES

    Yorumlar
  • February-10 2020 05:14:02

    Thank you so much. I am very happy with the printer. I took my time to assemble it, and measured every small detail and every distance. Made sure that all the screws are nice and tight. Read the instructions a few times, and it was printing very good from the first print. Only the SD card that had an unreadable file and I couldn't use it. So I downloaded Cura, as there was no where I could find the tronxy slicer online. But I'm very happy with it. Thanks.

    Yorumlar (1)
  • July-26 2020 02:07:08

    This being my first 3D printer and my first experience with 3D printers I must say I am very happy about the purchase. Assembling the printer is not as hard as some would claim. You are perfectly capable of ding that If you are able to use a screwdriver and follow instructions; instructions provided are quite ok. It took me about six hours to assemble and I had my first print in eight hours. I am also quite satisfied with the print quality, although I really don't have anything to compare. Some

    Yorumlar
  • September-27 2020 12:18:22

    Olá infelizmente não tive uma boa experiência. A impressora levou 2 meses para chegar por conta da greve dos Correios no Brasil. Além disso tive 3 problemas. 1 Uma peça de acoplamento do motor de passo veio com medida menor e tiver que comprar outra no mercado interno. 2 veio com um fio da mesa aquecida solto dentro do case. 3 a estrusora veio sem a polia principal que estrusa o filamento. Eu comprei esse modelo exatamente por ter estrusora em titânio e a peça em titânio não veio dentro da

    Yorumlar
  • August-13 2020 19:44:50

    Received the printer today was packaging was in good condition, assembling now all the pieces seem to be in the package though some of the instructions need clarification and screw size was wrong for the foot pads. Pictures are a little fuzzy at times and not able to get a good look at the part or parts being assembled hope to try it out tomorrow and finish the review.

    Yorumlar
  • November-07 2020 00:41:50

    Ik ben tevreden. Kijk niet meer naar oude reviews. want alle slechte punten zijn opgelost. Dit is mijn eerste 3d printer en ik heb hem in 1 dag werkend te staan gehad.

    Yorumlar
  • August-04 2020 09:22:11

    Lieferzeit 5 Tage - TOP. Sehr gute Qualität und Passgenauigkeit. Eine schnelle Montage war somit kein Problem. Gleich der erste Druck von der Speicherkarte sah super aus und war passgenau. Ich kann den Drucker nur empfehlen

    Yorumlar
Show:

    Go to page

    Go

    İlginizi çekebilir

    recommendation for you
    • TRY2,715.43
    • TRY2,154.72
    • TRY3,997.05
    • TRY2,955.73
    • TRY7,201.10
    • TRY3,196.04
    • TRY3,196.04
    • TRY1,521.84
    • TRY2,715.43
    • TRY1,361.64
    • TRY1,994.52
    • TRY2,074.62
    • TRY192.16
    • TRY172.06
    • TRY136.09
    • TRY29.96
    • TRY192.16
    • TRY3,756.75