Müşteri Değerlendirmesi

Bir Değerlendirme Yaz
  • Toplam (55) İnceleme
  • (7) Görüntü
  • (0) Video
  • Tüm Yıldızlar
    • Tüm Yıldızlar(55)
    • 5 Yıldız(49)
    • 4 Yıldız(2)
    • 3 Yıldız(3)
    • 2 Yıldız(0)
    • 1 Yıldız(1)
Göre sırala:
En İyi İnceleme
  • En İyi İnceleme
  • En Yararlı
  • En Son
Yalnızca ülkenizden yorumlar (Turkey)
|
Orjinali göster

İncelemenin bir kısmı otomatik olarak çevrildi.

  • 09/05/2021

    Product arrived as described. Packaged very well. No damage to product. I purchased this item specifically to convert 1 side of my Mankati 3D printer to print with 1.75mm flex filament. Now I can print with 3mm and 1.75mm filament. The extruder mounts perfectly to a nema 17 stepper motor. This extruder can work with flexible filament. When I first used it I had to change the e-steps value. Because this item is transparent it helps to see any problems. When I tried my first print the flexible filament was escaping between the rollers. After some trial and error I found that the original spring is too strong/stiff. NOTE: IF YOU WANT TO PRINT WITH FLEX FILAMENT YOU WILL NEED TO CHANGE THE SPRING. I used 2 springs from a bicycle quick-release skewer. These springs have much less strength than original spring. See photos. These worked perfectly. After some tuning of print speed and flow the print quality is excellent. Using the existing spring I expect that this extruder will work very well. I will continue to use the extruder with the new springs. Banggood, I would recommend you supply a weaker spring; maybe half the strength would be ok.

    Yorumlar
    Orjinali göster
  • 06/06/2021

    the extruder is good but i had problems with mounting it to ender 3 pro. the one side was in the contact with threaded rod and was jamming it so i had to trim one side as shown in the picture.

    Yorumlar
    Orjinali göster
  • 30/06/2021

    excelente servicio

    Yorumlar
    Orjinali göster
  • DomVIP3
    ZA
    20/04/2021

    Received in good order have yet to test.

    Yorumlar
    Orjinali göster
  • 25/10/2021

    Přišlo včas a v pořádku.

    Yorumlar
    Orjinali göster
  • 27/02/2021

    Working perfectly.

    Yorumlar
    Orjinali göster
  • 27/11/2020

    super en remplacement sur ma tevo tarantula pro

    Yorumlar
    Orjinali göster
  • 11/01/2022

    works well, but be warned if you want to install on an Ender 3. It doesn't fit the Ender because the lead screw gets in the way. You can use a file or grinder to file out a piece of the extruder's case so it fits, but it's quite some work. In the end it's worth the effort, it will help you achieve faster printing speeds with no underextrusion due to the printer skipping steps. It was a bit noisier than the stock extruder when using linear advance and fast printing speeds, but this can be sorted out by adjusting the "screw" that tensions the extruder gears

    Yorumlar
    Orjinali göster
  • 08/05/2021

    Works well and east to install. had to grind down the housing slightly to fit Ender 3 Pro. Comes in nice package and includes tools

    Yorumlar
    Orjinali göster
  • 05/12/2021

    worth the money and its see through which is interesting, also lightweight and can be used for direct drive

    Yorumlar
    Orjinali göster
Show:

    Toplam 0 sayfaları

    Sayfaya git

    Git

    İlginizi çekebilir

    recommendation for you
    • US$5.99
    • US$12.99
    • US$50.99
    • US$9.99
    • US$10.99
    • US$6.69
    • US$31.99
    • US$8.99
    • US$99.99
    • US$10.55
    • US$43.49
    • US$61.99
    • US$8.99
    • US$7.99
    • US$76.99
    • US$56.99
    • US$39.99
    • US$109.99