Koruma işlevine sahip 3.2V/3.7V/4.2V USB Li-ion Pil Şarj Modülü Kartı Güncelleme Versiyonu İncelemeleri

Koruma işlevine sahip 3.2V/3.7V/4.2V USB Li-ion Pil Şarj Modülü Kartı Güncelleme Versiyonu

US$5.99
~~US$7.99~~
Şimdi satın al

Müşteri Değerlendirmesi

4.96 üzerinden

93 incelemelerin tümünü görüntüle

5 yıldız
89 (95.7%)
4 yıldız
4 (4.3%)
3 yıldız
0 (0%)
2 yıldız
0 (0%)
1 yıldız
0 (0%)

Bir Değerlendirme Yaz Yayınlanan ilk 3 incelemeden biri senin incelemen olsun.2 kat Banggood puanı kazan!

Toplam (93) İnceleme
(12) Görüntü
(0) Video
Tüm Yıldızlar
- Tüm Yıldızlar(93)
- 5 Yıldız(89)
- 4 Yıldız(4)
- 3 Yıldız(0)
- 2 Yıldız(0)
- 1 Yıldız(0)

Göre sırala:

En İyi İnceleme

En İyi İnceleme
En Yararlı
En Son

Yalnızca ülkenizden yorumlar (Turkey)

Orjinali göster

İncelemenin bir kısmı otomatik olarak çevrildi.

bodoo69VIP3
RO
23/07/2018

1 OUT + This pins outputs the positive voltage from battery. It should be connected to the circuit which has to be powered by the battery 2 B + Outputs positive voltage from USB cable to charge to battery. It should be connected to the positive of the battery 3 B - Outputs negative voltage from USB cable for charging battery. It should be connected to negative of the battery 4 OUT - This pin outputs negative voltage from battery. It should be connected to the ground of circuit which has to be powered by the battery 5 IN + Should provide +5V can be used if charge cable not available 6 IN - Should provide ground of the +5V supply can be used if charge cable not available 7 LED Red This LED turns on while the battery is charging 8 LED Green This LED turns on after the battery is fully charged

1 OUT + This pins outputs the positive voltage from battery. It should be connected to the circuit which has to be powered by the battery 2 B + Outputs positive voltage from USB cable to charge to battery. It should be connected to the positive of the battery 3 B - Outputs negative voltage from USB cable for charging battery. It should be connected to negative of the battery 4 OUT - This pin outputs negative voltage from battery. It should be connected to the ground of circuit which has to be powered by the battery 5 IN + Should provide +5V can be used if charge cable not available 6 IN - Should provide ground of the +5V supply can be used if charge cable not available 7 LED Red This LED turns on while the battery is charging 8 LED Green This LED turns on after the battery is fully charged

1 OUT + This pins outputs the positive voltage from battery. It should be connected to the circuit which has to be powered by the battery 2 B + Outputs positive voltage from USB cable to charge to battery. It should be connected to the positive of the battery 3 B - Outputs negative voltage from USB cable for charging battery. It should be connected to negative of the battery 4 OUT - This pin outputs negative voltage from battery. It should be connected to the ground of circuit which has to be powered by the battery 5 IN + Should provide +5V can be used if charge cable not available 6 IN - Should provide ground of the +5V supply can be used if charge cable not available 7 LED Red This LED turns on while the battery is charging 8 LED Green This LED turns on after the battery is fully charged
3

Yorumlar

Orjinali göster
SbvosetaVIP1
IN
20/07/2019

Good

Good

Good
1

Yorumlar

Orjinali göster