Müşteri Değerlendirmesi

Bir Değerlendirme Yaz
  • Toplam (33) İnceleme
  • (2) Görüntü
  • (0) Video
  • Tüm Yıldızlar
    • Tüm Yıldızlar(33)
    • 5 Yıldız(32)
    • 4 Yıldız(1)
    • 3 Yıldız(0)
    • 2 Yıldız(0)
    • 1 Yıldız(0)
Göre sırala:
En İyi İnceleme
  • En İyi İnceleme
  • En Yararlı
  • En Son
Yalnızca ülkenizden yorumlar (Turkey)
|
Orjinali göster

İncelemenin bir kısmı otomatik olarak çevrildi.

  • 11/02/2021

    corrisponde alla descrizione e da provare ma non ci dovrebbero esserci problemi. nella descrizione ci sono delle istruzioni per utilizzarlo al meglio, più di così....Darò un altra valutazione dopo averla provata.

    Yorumlar
    Orjinali göster
  • 16/11/2020

    bien reçu produit de qualité conforme à ce qui a été dit ras

    Yorumlar
    Orjinali göster
  • 02/04/2021

    The product seems and has the functions exactly as described in the advertisement. It has arrived in a well packed, solid package earlier than expected. Works perfectly with CNC 3018, strongly suggested to have.

    Yorumlar
    Orjinali göster
  • 23/02/2021

    The controller works pretty well. Only the display is slightly misaligned with the box, but it doesn't limit the use. Nevertheless it is nice upgrade to my 2417 CNC router. It took me a while to find out, that to swap between chinese and english requires long press of Z+ button.

    Yorumlar
    Orjinali göster
  • 15/01/2021

    ΣΕ άριστη συσκευασία τα παρέλαβα και η πρώτη εικόνα που έβγαλα είναι τέλεια επιφύλασσε για περισσότερα στο μέλλον...

    Yorumlar
    Orjinali göster
  • 10/07/2021

    Todavía no lo puedo calificar, En cuanto instale el software del controlador GRBL lo podré probar.

    Yorumlar
    Orjinali göster
  • 11/09/2021

    Chinese language by default. but you can change to English. worked like a charm, easy to use it instead of laptop

    Yorumlar
    Orjinali göster
  • 27/06/2021

    I thought the board was bad on my cnc router, but this unit proved that board was OK and my router works just fine. Thank You Banggood

    Yorumlar
    Orjinali göster
  • 20/06/2021

    long press top left button to change language to english

    Yorumlar
    Orjinali göster
  • 08/05/2021

    Cable does not fit the 3018 pro cnc directly, even if supposed to. So have to figure out pinout, and made an adapter - which is a bit annoying.

    Yorumlar
    Orjinali göster
Show:

    Toplam 0 sayfaları

    Sayfaya git

    Git

    İlginizi çekebilir

    recommendation for you
    • TRY173.59
    • TRY112.81
    • TRY112.81
    • TRY104.12
    • TRY69.39
    • TRY269.12
    • TRY112.81
    • TRY104.12
    • TRY60.70
    • TRY104.12
    • TRY69.39
    • TRY434.12
    • TRY329.91
    • TRY798.85
    • TRY494.91
    • TRY329.91
    • TRY121.49
    • TRY130.17