bgood
İçeriklerim
Tüm Mesajlar
İncelemeler
Yorumlar
cevaplar
Sorular

Tüm Mesajlar

bgood 29/01/2020
Everything is as described. Cables are good, bed very well, but a touch shorter than described.
5 adet 30 CM Mavi Erkek USB 2.0A Mini Erkek USB B Kablosu Için
US$6.99 US$8.99
0
Tavsiyeler
Yorumlar (1)
bgood 15/08/2019
Good quality motors. Everything is straight and arrived without damages. I haven't tried to run the motors yet.
HANPOSE 17HS3401-S T8x8 Nema 17 Kurşun Vidası Adım Motoru Lineer Aktüatörler 34mm 1.3A 28N.cm 4 uçlu 42 Motor 100-500mm Trapezoidal Kurşun Vidası 3D yazıcı için Z Ekseni
US$27.99 US$33.99
0
Tavsiyeler
Yorumlar (0)
bgood 15/08/2019
Good quality. In real life, the brackets look better than on the pictures. Screws are included. M3 screws for motor mounting are handy. The screws for long mounting slots are M3 and have flat heads. No reason to have flat heads, and M3 is too small. M4 would work better for the size of the slot.
3D Yazıcı İçin 5x5x5cm Vidalarla Birlikte 42MM NEMA17 Step Motor Alaşımlı Çelik Montaj Braketi
US$6.99 US$8.99
0
Tavsiyeler
Yorumlar (0)
bgood 28/08/2019
Good quality hole saws. I used 20mm to make two holes in 1/4 (6.5mm) 6061 aluminum. At the beginning it worked fine, produced nice long shavings from every tooth, but once the thees went completely inside the metal, it doesn't work very well any more. I did manage to make holes, but I had to lift the whole saw every few seconds and clean it, and I had to use lots of oil. The holes were very smooth. If you want to drill thin (2-3mm) aluminum, these whole saws are perfect. I don't know about longevity, but it was still sharp after my 2 holes.
Drillpro 5 Adet HSS 6542 Titanyum Kaplı Çukur Testere Diş HSS Çukur Testere Kesici Matkap Seti 16/18.5/20/25/30mm
US$16.06 US$30.74
0
Tavsiyeler
Yorumlar (0)
bgood 28/08/2019
Nice hole saws. I haven't tried any, but based on the others of the same kind, these should be perfect for 2-3mm aluminum. They come with springs. I don't think the springs are useful. I would remove them. Besides, the spring doesn't even fit inside 12mm hole saw. Each hole saw came in a separate plastic box with its own hex wrench which can be used to change the center drill bit.
4 adet 12/14/16 / 18mm HSS Titanyum Kaplamalı Delik Testere Kesici Matkap Bit Set
US$8.79
0
Tavsiyeler
Yorumlar (0)
bgood 17/10/2019
Good quality. Correct length.
8mm 100/200/285/320/350mm Karbon Çelik Lineer Ray Mil Çubuğu
US$3.39 US$3.99
0
Tavsiyeler
Yorumlar (0)
bgood 17/10/2019
Good quality. Even better than described: nickel plated instead of zinc plated.
Drillpro 50pcs M5 T Sürgülü Somun Çinko Kaplama Karbon Çelik T Sürgülü Somun için 2020 Alüminyum Profil
US$10.99 US$13.99
0
Tavsiyeler
Yorumlar (0)
Machifit T8 Kurşun Vidaya Muhafaza Braketi T8 Vidalı Mesnet İçin Pirinç Muhafazayla
US$8.99 US$10.99

Q: can you tell me the distance from the center of the 10mm hole to the mounting face with the M4 tapped holes. this dimension is missing from the details.

Soran funbags52 Açık 2018-01-09 07:58:40

bgood On the unit I received the hole is right ion the middle, so it would be 15mm.

2019-07-26 12:06:31 Yararlı (0)
Gönder
cevaplar (4)
Suleve M5SH6 50 Adet M5 Paslanmaz Çelik Hex Soket Düğme Kafası Vida Cıvata 8-30mm Opsiyonel Uzunluk
US$4.99 US$6.99

Q: They are full thread?

Soran egongorac Açık 2019-07-03 10:19:40

bgood Ibought 10mm. They're full thread.

2019-07-24 03:59:10 Yararlı (0)
Gönder
cevaplar (1)
bgood 01/09/2019
Good screws. I bought 16 mm.
Suleve M5SH6 50 Adet M5 Paslanmaz Çelik Hex Soket Düğme Kafası Vida Cıvata 8-30mm Opsiyonel Uzunluk
US$4.99 US$6.99
0
Tavsiyeler
Yorumlar (0)
bgood 24/08/2019
Good quality. Fits into the channel very well.
Machifit 50pcs 20M3 T Kayar Somun M3 Yuvası T Somun için 2020 Alüminyum Profil
US$8.99 US$15.99
0
Tavsiyeler
Yorumlar (0)
bgood 24/08/2019
Good items..I've got three. In all of them, the ball nearinga are sitting in the housing very tight and cannot self-adjust as it should. I could only move the ball bearings with a hummer.
Machifit 8/10/12/15/17mm Delik Çapı Çinko Alaşımlı Yastık Blok Flanşlı Lineer Rulman KFL Serisi CNC
US$6.99 US$8.99
0
Tavsiyeler
Yorumlar (0)
bgood 24/08/2019
Good quality. Perfect fit.
Machifit SK8/10/12/16 Lineer Ray Mil Desteği XYZ Masa CNC Router
US$6.99 US$8.99
0
Tavsiyeler
Yorumlar (0)
bgood 24/08/2019
Good quality.
8mm 100/200/285/320/350mm Karbon Çelik Lineer Ray Mil Çubuğu
US$3.39 US$3.99
0
Tavsiyeler
Yorumlar (0)
bgood 24/08/2019
Decent quality. In one of the items, the bearing is a little bit too tight. I'm afraid the motor will have troubles moving it. We'll see,
6mm SI6T/K Dişi İplikli Çubuk Ucu Eklem Rulmanı Sağ El İplikli Eklem Rulmanı
US$6.99 US$8.99
0
Tavsiyeler
Yorumlar (0)
bgood 15/08/2019
Good quality. No damages.
Machifit Gümüş 100-1300mm 2020 T-yuvası Alüminyum Ekstrüzyon Alüminyum Profiller Çerçeve CNC Lazer Oyma Makinesi
US$5.43 US$5.99
0
Tavsiyeler
Yorumlar (0)
bgood 12/08/2019
The tool looks Ok. Good quality. I haven't tested them yet.
6pcs M3-M8 Tap Drill Set T Handle Ratchet Tap Wrench Machinist Tool With Vida Tap Hand
US$9.99 US$11.99
0
Tavsiyeler
Yorumlar (0)
bgood 12/08/2019
Very good quality. Perfect fit.
T8 Kurşun Vida Somun Ayarlanabilir 2mm/4mm/8mm Kurşun Somun Boşluk Önleyici Yaylı Somun
US$8.99 US$10.99
0
Tavsiyeler
Yorumlar (0)
bgood 12/08/2019
Perfect look. Exceptional quality. Very sturdy. Highly recommended.
Machifit 5 Delikli Alüminyum Profil Köşe Braketi CNC V yuvası için 90 Derece L Tipi Düzleştirme Plakası 2020 3030 Alumin
US$7.99 US$9.99
0
Tavsiyeler
Yorumlar (0)
bgood 12/08/2019
Drill bits look very nice. I haven't tried to drill yet.
Drillpro DB-T2 13pcs 1.5-6.5mm HSS Titanium Coated 1/4 Inch Hex Shank Twist Matkap Bit Set
US$12.99 US$14.99
0
Tavsiyeler
Yorumlar (0)

Uzmansın, yardım edebilir misin?

Sizi Davet Yanıtı e-postasına abone olmaya içtenlikle davet ediyoruz!

Abone olursanız, sizi e-posta yoluyla insanların ürünlerle ilgili sorularını yanıtlamaya davet edeceğiz. Size abone olarak] ayrıca "Yararlı Rozeti " kazanacaksınız! Gizlilik ayarları sayfasından istediğiniz zaman aboneliğinizi iptal edebilirsiniz.

Başkalarına yardım edin ve daha mutlu olun!

  • Abone ol

Rozetler Hakkında

Rozetler toplulukla ilgilidir ve kullanıcılar kaliteli içerik oluşturarak, görevleri tamamlayarak veya özel etkinliklere katılarak rozet kazanırlar. Belirli kişilerin kendi özel rozetlerine sahip olmaları gerekir.
CEO ROZETİ

The CEO ünvanı yalnızca Banggood patronuna aittir.

Kazanabileceğiniz rozetler yakında geliyor
  • TAMAM

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • TAMAM

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe