Tüm Mesajlar

Aaron 2020-09-09 21:02:27
0
Tavsiyeler
Yorumlar (0)

Beğenebileceğiniz En İyi İncelemeler:

Q: Does it work with smartaudio?

Soran Red_Baron Açık 2019-10-16 06:33:55

BG400211905 ---> Special firmware on the FC to get SA to work. <---

2020-08-25 08:08:48 Yararlı (0)
Gönder
cevaplar (2)

Q: what is the supply voltage range?

Soran AaronSommers Açık 2018-08-26 10:36:21

humlebi1 The first line in the description; Working voltage: 3~12V

2020-07-20 02:42:29 Yararlı (0)
Gönder
cevaplar (2)

temporalflux I had this problem and managed to fix it. In Betaflight BF4.1.5 or later (might still work on BF4.1.0 to BF4.1.4, I'm not sure), go the Video Transmitter tab. First, make sure that you have the IRC Tramp VTxTable set up (just do a search for 'Betaflight VTXtables' and the first result should take you to the Betaflight GitHub page for VTxTables). Then (and, this is what fixed it for me), turn on the slider that says 'Enter frequency directly' and, save. Not sure if this matters but, I had mine originally set, under that slider, to 5733 (BOSCAM_B 1) on 25mW. I can now change it via the OSD to any of the other supported channels and power levels.Hope this helps, it worked for me.

2020-07-11 09:51:36 Yararlı (0)
Gönder
cevaplar (3)

Gdgolden maybe you can use the "contact us" to contact the banggood customer service team.

2020-06-11 03:16:20 Yararlı (0)
Gönder
cevaplar (1)
Aaron 2019-11-09 18:50:36
1
Tavsiyeler
Yorumlar (1)

Beğenebileceğiniz En İyi İncelemeler:

MinceR22 The version I had I could connect to a cleanflight - betaflight FC(inav didn't work) and it had a version of blheli_S on it.. I even reprogrammed it. So if you want to reprogramm via transmitter the normal BL Heli s manual should work. Was an older version of blheli so not sure everything works. Worked really well( after i updated to latest bl Heli s version) and had no overspeed problems with small props.

2020-04-18 03:39:13 Yararlı (0)
Gönder
cevaplar (1)

Q: So what is this exactly???

Soran Aaron Açık 2020-02-13 08:32:14

Saltus This is a machine frame part for jjrc h36f model

2020-02-23 12:49:25 Yararlı (0)
Gönder
cevaplar (1)

Q: *edit* UARTS not 'parts' available for GPS?

Soran AaronSommers Açık 2020-01-14 06:40:38

Pqgarvis you can connect gps via tx and rx by solder rx to tx and tx to rx

2020-02-17 03:51:56 Yararlı (0)
Gönder
cevaplar (1)

Q: Good for WLToys 20409? Front and rear for that car?

Soran AaronSommers Açık 2019-05-15 05:00:19

Sayedbakhtyar no good for wltoy A959

2020-02-14 11:34:46 Yararlı (0)
Gönder
cevaplar (1)

Alowgo Howdy: The answer is kind of YES and kind of NO! It will fit but the Hybird uses 2 holes on each side of the camera for mounting! There forth the Hybird needs to have the 2 correct aluminum pieces that GepRC has made for the CineQueen to mount the Hybird properly in the same style of frame. I know this because I have already switches out the Split for the Hybird. So I contacted GepRC and ordered-bought the correct mounts from them! I hope this info helps you out. Later Alowgo

2020-02-06 11:48:15 Yararlı (1)
Gönder
cevaplar (2)
Aaron 2020-01-14 06:03:00
0
Tavsiyeler
Yorumlar (0)

Beğenebileceğiniz En İyi İncelemeler:

Aaron 2020-01-14 06:01:11
0
Tavsiyeler
Yorumlar (0)

Beğenebileceğiniz En İyi İncelemeler:

Aaron 2020-01-07 16:19:25
0
Tavsiyeler
Yorumlar (0)

Beğenebileceğiniz En İyi İncelemeler:

Q: Any fuses?

Soran AaronSommers Açık 2019-12-12 04:44:59

Jafarr No.

2019-12-31 05:03:31 Yararlı (0)
Gönder
cevaplar (1)