Tüm Mesajlar

Q: is it waterproof

Soran Arkatitanic Açık 2019-09-02 04:39:32

katmandieux Absolutelynot. If you have to use it in a wet environment, put it in a waterproof box.

2023-11-26 04:37:17 Yararlı (0)
Gönder
cevaplar (24)

Q: Is the horned throat all metal or with a ptfe tube?

Soran francomasella Açık 2019-08-05 02:17:05

katmandieux PTFEtube - not for high temperatures.

2023-11-26 04:36:11 Yararlı (0)
Gönder
cevaplar (3)

katmandieux Thank you for sharing your experience. Mine has been working fine since purchased. It sounds like you either had a badly defective one or it overloaded a circuit and somehow caused a direct short. It would be interesting to cut it open to see what went wrong.

2022-11-25 10:27:01 Yararlı (0)
Gönder
cevaplar (1)

Q: According to the contiguity, are you currently sent to Mexico?

Soran jaqueline Açık 2020-04-20 04:20:24

katmandieux Youneed to send a message to the seller and ask them.

2022-05-07 09:48:35 Yararlı (0)
Gönder
cevaplar (6)

Q: Does this camara work with windows 7?

Soran grandfather Açık 2019-11-18 02:46:06

katmandieux Yes. It also works with XP.

2022-05-07 09:46:41 Yararlı (0)
Gönder
cevaplar (8)

katmandieux It depends on the diameter that you order. I bought the 1.5mm diameter and the roll is 50 meters long. Looking at the description it says that 0.75mm dia. is 100 meters, 1mm is 100 meters, 1.5mm is 50 meters, and 2mm dia. is 50 meters long. Hope this helps!

2022-04-28 12:05:21 Yararlı (0)
Gönder
cevaplar (1)

Q: how many amps do they draw individually?

Soran ianking741 Açık 2019-07-28 02:43:42

katmandieux Theload on the motor will affect the amperage, but in all cases well under 1 amp.

2022-04-12 03:59:03 Yararlı (0)
Gönder
cevaplar (7)

Q: I´m from Brazil It is Bivolt? 110v/220v?

Soran Cassio Açık 2018-11-10 01:15:14

katmandieux Yesit is. There is a switch on the power supply that you must set to the correct voltage, either 110v or 220v. It will work fine on either.

2022-04-12 03:57:38 Yararlı (0)
Gönder
cevaplar (5)

Q: alguna forma de alimentarlo externamente? gracias!

Soran galofer Açık 2020-10-09 03:34:41

katmandieux AUSB cable plugged in to a 5v source will work. In fact, it is almost necessary as the internal battery does not last long.

2022-03-29 12:51:37 Yararlı (0)
Gönder
cevaplar (3)

Q: Can it be used for bigLABISTS?

Soran raito0603 Açık 2020-11-05 12:08:00

katmandieux Sorry,I'm not familiar with bigLabists. It does fit the Creality Ender 3 and CR-10 3D printers. Check to see if yours is compatible.

2022-03-29 12:49:22 Yararlı (0)
Gönder
cevaplar (2)

Q: Does It fit the ender 5 plus?

Soran Andre Açık 2020-11-02 08:55:29

katmandieux No,you need a belt specially made for the Ender 5 plus.

2022-03-29 12:47:18 Yararlı (0)
Gönder
cevaplar (3)

Q: What size battery for replacment?

Soran Darky82 Açık 2022-02-22 07:39:59

katmandieux It uses a 3.7 volt LiPo battery with a JST connector. Search online and you will find many available. Choose one that is the same dimensions as the battery in your drone.

2022-02-22 12:26:08 Yararlı (1)
Gönder
cevaplar (1)

Q: does it needs any calibration to set 5 volt output?

Soran parveenperfect71 Açık 2019-08-21 07:31:20

katmandieux No calibration needed, but connect output to a load before checking the voltage.

2022-01-28 09:29:39 Yararlı (0)
Gönder
cevaplar (2)