JGAURORA® 310*310*13.6mm Alüminyum Isıtmalı Yatak Plakası 6PIN Isıtma Kablosu için
İncelemenin bir kısmı otomatik olarak çevrildi.
it is not pin tipe.it is soldered tipe heatbed and there's no led indication on heated bed.
Heated bed is ok... but packaging should be better. It was protected only by bubbled plastic foil, no box. As result one corner was a little dented. After fixing this looks ok. Delivered by PostNL, so good service. If your post is not so nice for packets... be aware...
arrived very well, great quality and awesome upgrade for my A5, all the communication with the vendor is great, but need better pachagin
received undamaged bought for diy printer looks like it will serve the intended purpose
The plate is 2mm thick, not 13.6mm as described. There is a hole in the plate for the thermistor and mine came without a plug but with connectors soldered directly to it. No LED installed either.
nice product but product isn't same with picture.
it is not socket tipe there is no led indicator and it is soldered tipe
This is the newer heater bed with the power plug pointed down. I got this as a spare replacement for the one in use now. The one good thing about replacing it is that I can go with a regular glass bed. The Black diamond has 2 bad issues. The parts curl up on the ends and come loose all the time. Also note this is a less than 3 mm thick bed not a 13.6 mm plate.
Doručený , doporučoval by som lepšie dosku zabaliť , aby sa pri doprave neohla.
Not the same product. First of all there is no terminal connector. Cables are soldered directly. Also i dont know operate voltage because there is no any info on the plate like the picture shows in product info.