it showed up pretty quickly. I inspected all the pieces they look perfect tell everyone who was involved bravo. Everything was packaged perfectly and everything came out great.🫡👍🏼🤚🏼

it showed up pretty quickly. I inspected all the pieces they look perfect tell everyone who was involved bravo. Everything was packaged perfectly and everything came out great.🫡👍🏼🤚🏼

it showed up pretty quickly. I inspected all the pieces they look perfect tell everyone who was involved bravo. Everything was packaged perfectly and everything came out great.🫡👍🏼🤚🏼

the kit arrived fast and well packed. the plane is made of EPS, not durable at all. No instructions, so know what you're getting into. The motor bay is too deep for basic drone motors, I printed a motor mount to fit (18mm tall, to fit a cheap 2205). servo spaces are for 9g servos. There is quite a bit of DIY to get it right. even with light electronics and a 450mah 3s(and had to enlarge the compartment inside. The propeler, if I remember correctly has a 2mm hole, not 3.17mm like someone wrote in his review. so 2mm with a hex nut insert hole. I just used my own 5x5 prop. I needed extra 20g of weight on the nose for good CG. flies decent and quite fast, I'd say stall speed is ~30km/h, but needs at least 40 to respond ok to commands. I got AUW at 350g, with the 2205 2400kv motor running a 5x5 prop, on 3s 450mah lipo does a good vertical. enough power to get out of a stall that can happen quite easy at slow flight. Definitely not for first time flyers nor builders.

the kit arrived fast and well packed. the plane is made of EPS, not durable at all. No instructions, so know what you're getting into. The motor bay is too deep for basic drone motors, I printed a motor mount to fit (18mm tall, to fit a cheap 2205). servo spaces are for 9g servos. There is quite a bit of DIY to get it right. even with light electronics and a 450mah 3s(and had to enlarge the compartment inside. The propeler, if I remember correctly has a 2mm hole, not 3.17mm like someone wrote in his review. so 2mm with a hex nut insert hole. I just used my own 5x5 prop. I needed extra 20g of weight on the nose for good CG. flies decent and quite fast, I'd say stall speed is ~30km/h, but needs at least 40 to respond ok to commands. I got AUW at 350g, with the 2205 2400kv motor running a 5x5 prop, on 3s 450mah lipo does a good vertical. enough power to get out of a stall that can happen quite easy at slow flight. Definitely not for first time flyers nor builders.

the kit arrived fast and well packed. the plane is made of EPS, not durable at all. No instructions, so know what you're getting into. The motor bay is too deep for basic drone motors, I printed a motor mount to fit (18mm tall, to fit a cheap 2205). servo spaces are for 9g servos. There is quite a bit of DIY to get it right. even with light electronics and a 450mah 3s(and had to enlarge the compartment inside. The propeler, if I remember correctly has a 2mm hole, not 3.17mm like someone wrote in his review. so 2mm with a hex nut insert hole. I just used my own 5x5 prop. I needed extra 20g of weight on the nose for good CG. flies decent and quite fast, I'd say stall speed is ~30km/h, but needs at least 40 to respond ok to commands. I got AUW at 350g, with the 2205 2400kv motor running a 5x5 prop, on 3s 450mah lipo does a good vertical. enough power to get out of a stall that can happen quite easy at slow flight. Definitely not for first time flyers nor builders.