Teslimat Yeri United Kingdom , USD
Banggood'da %s için En Olumlu Yorum, Banggood'da en düşük fiyata en iyi %s satın alın. Satın almadan önce %s için en yararlı olumlu incelemelere göz atın., rc oyuncaklar, eğlenceli sporlar, moda, popüler elektronik
BG642244317 09/08/2020
The Binary has a fairly thin wing chord that makes it prone to tip stalling especially if flown under a heavy load. I have added 70x4mm Balsa wood to the trailing edge. This modification is simple to do and it does a superb job of making this plane super easy to fly without any tip stalling in the turns and only using a 1/3 throttle. flys for around 25 minutes using a 4s 3300mah lipo. The Binary is an easy build and the foam is of excellent quality. definitely worth buying the electric pack with the twin motors and 40amp escs, but make sure you glue the engine mounts in with top quality glue/epoxy as they are prone to working loose. A few people had a few bad words to say about this plane because of tip stalling. just do the simple modification to the wing and it will be fine. You can leave it as stock but you will need to keep the speed up in the turns. This is now one of my favourite planes and it has lots of room for all your Fpv gear and a nice shelf for a flight controller.
7
Yorumlar (2)
Gönder
  • rwdkai anymore photos of wing mod, how did you attach balsa to foam and did you laminate over it?

    Cevap 23/09/2020
  • Hamidnazer I am actually doing the same thing

    Cevap 27/05/2021
Memnuniyet anketi

Uygulamayı İndir özel 10% indirim kuponunu kap