Well thought out kit with nicely cut parts. 3D printed motor mount. Would be a bonus if the stl file is available. Only negative is that the one sheet, photocopied instructions are only Chinese. The parts fit together well and will make a good sub 250g wing. Could easily fit an AIO FPV camera on the front. Recommended.

Well thought out kit with nicely cut parts. 3D printed motor mount. Would be a bonus if the stl file is available. Only negative is that the one sheet, photocopied instructions are only Chinese. The parts fit together well and will make a good sub 250g wing. Could easily fit an AIO FPV camera on the front. Recommended.

Well thought out kit with nicely cut parts. 3D printed motor mount. Would be a bonus if the stl file is available. Only negative is that the one sheet, photocopied instructions are only Chinese. The parts fit together well and will make a good sub 250g wing. Could easily fit an AIO FPV camera on the front. Recommended.

nice epp lots of carbon, only thing where is the COG?

nice epp lots of carbon, only thing where is the COG?

nice epp lots of carbon, only thing where is the COG?

otima asa fácil de montar muito estável ,se usar bateria 550 e 850 nao precizar procurar CG e a bateria que eu uso voa muito estave com esta bateria 550 e 850 , so toma cuitado pr a nao voar onde venta muito pode vibrar ou flambar ,tou satisfeitos

otima asa fácil de montar muito estável ,se usar bateria 550 e 850 nao precizar procurar CG e a bateria que eu uso voa muito estave com esta bateria 550 e 850 , so toma cuitado pr a nao voar onde venta muito pode vibrar ou flambar ,tou satisfeitos

otima asa fácil de montar muito estável ,se usar bateria 550 e 850 nao precizar procurar CG e a bateria que eu uso voa muito estave com esta bateria 550 e 850 , so toma cuitado pr a nao voar onde venta muito pode vibrar ou flambar ,tou satisfeitos

Exelent plane for a beginner. Build took 10 minutes. Seems pretty sturdy. Used a micro esc, 12a esc, 2280kv racestar, 3 blade 4 inch prop, 800mah 2s and it flies well fast and slow. but a little underpowered. Trimed wing with knife to reduce drag. Need to paint one side to help with orientation

Exelent plane for a beginner. Build took 10 minutes. Seems pretty sturdy. Used a micro esc, 12a esc, 2280kv racestar, 3 blade 4 inch prop, 800mah 2s and it flies well fast and slow. but a little underpowered. Trimed wing with knife to reduce drag. Need to paint one side to help with orientation

Exelent plane for a beginner. Build took 10 minutes. Seems pretty sturdy. Used a micro esc, 12a esc, 2280kv racestar, 3 blade 4 inch prop, 800mah 2s and it flies well fast and slow. but a little underpowered. Trimed wing with knife to reduce drag. Need to paint one side to help with orientation

Great little wing flys great as suggested although I have modded with an all in one Eachine TX06, smooth flying on an 1806 motor with a 5045 tri blade prop and a 20a esc powered by a 800mAh 2s lipo or a 550mAh 3s lipo 12-15 minute flight times with plenty of mAh to spare.all up weight well under the dreaded 250g, Its alot of fun and very inexpensive, a great way to spend a lazy afternoon to do some fpv cruising. I highly reccomend.

Great little wing flys great as suggested although I have modded with an all in one Eachine TX06, smooth flying on an 1806 motor with a 5045 tri blade prop and a 20a esc powered by a 800mAh 2s lipo or a 550mAh 3s lipo 12-15 minute flight times with plenty of mAh to spare.all up weight well under the dreaded 250g, Its alot of fun and very inexpensive, a great way to spend a lazy afternoon to do some fpv cruising. I highly reccomend.

Great little wing flys great as suggested although I have modded with an all in one Eachine TX06, smooth flying on an 1806 motor with a 5045 tri blade prop and a 20a esc powered by a 800mAh 2s lipo or a 550mAh 3s lipo 12-15 minute flight times with plenty of mAh to spare.all up weight well under the dreaded 250g, Its alot of fun and very inexpensive, a great way to spend a lazy afternoon to do some fpv cruising. I highly reccomend.

Very nice EPP plane, lots of carbon plus decent 3d printed mount. Properly painted to.

Very nice EPP plane, lots of carbon plus decent 3d printed mount. Properly painted to.

Very nice EPP plane, lots of carbon plus decent 3d printed mount. Properly painted to.

Perfekt park slow flyer, very robust!

Perfekt park slow flyer, very robust!

Perfekt park slow flyer, very robust!

Good packing. Simple kit but okay

Good packing. Simple kit but okay

Good packing. Simple kit but okay

https://www.youtube.com/watch?v=edviFjZatoE

https://www.youtube.com/watch?v=edviFjZatoE

https://www.youtube.com/watch?v=edviFjZatoE

This is beginners friendly with light weight

This is beginners friendly with light weight

This is beginners friendly with light weight