Müşteri Değerlendirmesi

Bir Değerlendirme Yaz
  • Toplam (377) İnceleme
  • (54) Görüntü
  • (0) Video
  • Tüm Yıldızlar
    • Tüm Yıldızlar(377)
    • 5 Yıldız(361)
    • 4 Yıldız(14)
    • 3 Yıldız(2)
    • 2 Yıldız(0)
    • 1 Yıldız(0)
Göre sırala:
En İyi İnceleme
  • En İyi İnceleme
  • En Yararlı
  • En Son
Yalnızca ülkenizden yorumlar (Turkey)
|
Orjinali göster

İncelemenin bir kısmı otomatik olarak çevrildi.

  • 30/06/2019

    WPL Rc Truck Servo. Upgrade servo pre WPL aj JJRC modely aut najmä 1/16. Podrobnejšie parametre sú na obale serva (napr. Napätie 4,8 až 6V). OK doprava aj produkt.

    Yorumlar
    Orjinali göster
  • 12/09/2020

    The perfect metal geared servo replacement for all wpl (except c34/44) MN, fayee and jjrc trucks! It's the exact dimensions as the original servo youd find in a wpl kit, perfect for upgrading your rtr if it doesn't have proportional steering(will require a new esc and transmitter/receiver) Perfect replacement/upgrade if your original servo has chipped a gear like I've done so many times with the stock plastic geared one. Can be held securely in place using the spare servo horn over the top and screwed in with included screws. Inside theres metal gears and a nice layer of grease, very nice indeed. Highly recommend 👍

    Yorumlar (1)
    Orjinali göster
  • 07/04/2019

    This servo functioned well initially but after about 30 minutes operation, the output shaft stooped rotating. However, from the sound, the motor appeared to be still turning. Fearing a stripped gear, the cover was removed. Fortunately, rather than a stripped gear, it could be seen that the first idler pinion had moved up on its shaft such that it was no longer being engaged by the motor pinion. To fix this problem, a small washer was glued to the pinion to serve as a spacer and prevent the pinion from moving far enough to disengage. The servo now functions as intended. It is possible that this is an isolated failure as otherwise the servo appears well made (eg, mostly metal gears, strong case, etc)

    Yorumlar (1)
    Orjinali göster
  • 03/12/2018

    Очень компактная! брал на WPL C24 в живую выглядет более качественно чем на фото. чувствуется вес в руках, видимо шестерни действительно метал

    Yorumlar
    Orjinali göster
  • 09/02/2021

    Not installed yet. Seems ok. Delivery ok

    Yorumlar (1)
    Orjinali göster
  • 04/04/2019

    This is a JX PDI-1181MG servo. It has exactly the dimensions of the WPL or MN-90 servos and even the same pinion with the high teeth count (40+ teeth). Direct replacement for servo in MN-90 D90 1/12 or Willys Jeep JJRC Q65. Strong, significantly stronger than the stock servo. Highly recommended, very good upgrade!

    Yorumlar
    Orjinali göster
  • 23/01/2020

    As described. Fast delivery to the UK. Just what I needed!

    Yorumlar
    Orjinali göster
  • 18/10/2019

    ok

    Yorumlar
    Orjinali göster
  • 02/10/2021

    Nice fast servo. No complaints. Use it for WLtoys 144001 conversion to brushless motor and digital servo combo.

    Yorumlar
    Orjinali göster
  • 30/09/2021

    Servo běží dobře.

    Yorumlar
    Orjinali göster
Show:

    Toplam 0 sayfaları

    Sayfaya git

    Git

    İlginizi çekebilir

    recommendation for you
    • US$23.99
    • US$24.99
    • US$14.99
    • US$15.99
    • US$9.99
    • US$13.99
    • US$27.99
    • US$18.99
    • US$22.99
    • US$44.27
    • US$70.99
    • US$6.99
    • US$18.99
    • US$14.99
    • US$12.99
    • US$24.99
    • US$11.99
    • US$21.99