knokke Telling to buy an other receiver is not going to help. If this receiver is advertised as weighting only 2.9 g , it should not weight 4 g. So what is the real weight of this receiver when delivered ? 2.9 g or 4g as the customer is complaining ?

knokke It is not possible to remote control the running lights (main upper lights). They light up when the car moves forward if they're plugged in J2 . If plugged instead in J7 with the jumper 3 set in off position, they will stay lighted all the time. I don't know what davew is talking about. You can't plug anything in the receiver's third channel as the two Y cable should be plugged into the Channel 1 and 2 of the receiver. The only way to have the running lights turned on and off remotely would be to replace them by a set of light with a resistor and plugging them in a RC switch into the third channel (or any other if more channels are available) of the receiver. You can't plug the lights of the kit into the receiver directly, as they would probably fry as they don't have a resistor to withstand the 5v or 6v supplied by the ESC through the receiver.

knokke don't listen to the bullshit told by BG172915434, he doesn't know what he's talking about. White led comes in two sizes: the two lower front lights are 3mm diameter, while the two upper (main) front light are 5mm in diameter. Yellow turn indicator led are 3mm in diameter. The two red led for rear brake lights are 3mm in diameter. The two reversing white lights led are 5 mm in diameter.

knokke it can be used with other vehicles than the rochobby 1-6 1941 Scaler. It is the same product as hobbywing quicrun 1060 60A brushed ESC

knokke They are not bullets, they're the levers of the transmitter.

knokke Why should it not work with the DJI F450 ? As long as the F-450 is equipped with a Flysky receiver compatible with the FS-i6S transmitter, it should work.

knokke chinese magic

knokke no, the steering is not proportional. To make it proportional, you'll need to replace the servo