slimlim
- İçeriklerim
- Tüm Mesajlar
- İncelemeler
- Yorumlar
- cevaplar
- Sorular
cevaplar
Q: Will this work with a SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC?
Soran ItsRagnarok Açık 2022-03-18 20:56:46
slimlim Strange, the specs say 2S-3S but the "testing data" provided is for 3S-4S. If this was to be used with a 3" prop, I would use 3200KV for 4S & 4100KV for 3S.
Yararlı (0)
slimlim If you can see the betaflight boot screen that means you're on the right channel & the VTX is fine, your problem is likely the camera or its wiring. You could try wiring the camera (yellow wires normally) straight to the VTX to check it's working properly, if it works your issue will be with the OSD or it's wiring, if it doesn't work the issue is with the camera or it's power wiring.
Yararlı (0)
slimlim I would go for this one, it seems a better bet especially if you plan to run 4S. Tyro99 has a terrible camera that you will need to change anyway & the TVX is mounted on the outside so probably wont last long, for the extra $10 you get a much better camera & stack mounted VTX.
Yararlı (1)
Q: do you need to buy an extra transmitter or is it built in the camera ?
Soran selim_majeur Açık 2019-01-09 02:05:49
slimlim It's only a camera, not an AIO (all in one). You will need a transmitter too.
Yararlı (0)
slimlim It will work with any ESC as long as you wire the connector properly
Yararlı (1)