Tüm Mesajlar

JayBee The Manufacturer always knows best. Read what is written ion the ESC.

2020-11-23 02:54:27 Yararlı (0)
Gönder
cevaplar (2)

Q: Where can I buy the 4-blade US65/UK65 propellers?

Soran TweakRacer Açık 2019-01-05 03:24:17

eried Ibought betafpv 4-blade ones and they work perfectly :)

2020-01-16 03:11:48 Yararlı (0)
Gönder
cevaplar (1)

Q: why 2 rhcp and 2 lhcp? should be all the same

Soran CpnMercury Açık 2019-12-12 10:08:08

TweakRacer Exactly. Should all be the same. Same goes for the MMCX antennas for the Air Unit. Lastly, SMA? This set is garbage.

2019-12-20 12:11:13 Yararlı (0)
Gönder
cevaplar (10)

Q: None popo option? Is this using a c-clip or screw?

Soran FTJ Açık 2018-12-27 03:21:48

TweakRacer Curitis, the question is about the retaining of the shaft at the bottom of the motor, you dumb dumb

2019-01-21 04:15:16 Yararlı (1)
Gönder
cevaplar (2)

Q: Are this licensed PoPo motors?

Soran koncombre Açık 2018-12-31 05:37:48

TweakRacer JB, are you staying that Lumenier manufactures POPO shafts and sells them to other manufacturers like T-Motor or OEM brands like Hyperlite? Thought they were licensing to others, not actually selling them shafts to their specs. How do you know that RacerStar didn’t license or buy from Lumenier? Why stir up more drama? Also, the RacerStar motors use the POPO Pro style shaft (no pin sticking out the top), so they’re not supposed to be threaded. Geez

2019-01-21 04:14:09 Yararlı (0)
Gönder
cevaplar (2)

Q: what propellers are suitable for these motors

Soran Klapan2kl Açık 2018-12-24 12:25:14

TweakRacer JB, are you staying that Lumenier manufactures POPO shafts and sells them to other manufacturers like T-Motor or OEM brands like Hyperlite? Thought they were licensing to others, not actually selling them shafts to their specs. How do you know that RacerStar didn’t license or buy from Lumenier? Why stir up more drama? Also, the RacerStar motors use the POPO Pro style shaft (no pin sticking out the top), so they’re not supposed to be threaded. Geez

2019-01-21 04:13:57 Yararlı (0)
Gönder
cevaplar (2)

Q: Why not available for US customers?!

Soran TweakRacer Açık 2019-01-21 04:07:54

PaulyB why would you want Racerstar rubbish? the motors are utter garbage!

2019-02-15 03:44:33 Yararlı (0)
Gönder
cevaplar (1)

Q: What's prop spinner diameter, please?

Soran Romushock Açık 2018-06-05 04:00:50

TweakRacer The propeller is 9096 or 9" x 9.6", with a 22.5cm diameter... however, the question was about the diameter of the SPINNER (or "propeller cover")!

2018-09-25 05:55:22 Yararlı (0)
Gönder
cevaplar (5)

TweakRacer Stop asking for motor braking! If you stop the propellor the wing will glide faster and further. It is better for the propeller to spin freely and windmill, which will slow the wing for landing.

2018-09-24 07:27:16 Yararlı (0)
Gönder
cevaplar (2)

Q: why they send an incorrect propellers?

Soran Sergio_Luis Açık 2018-05-09 12:43:35

TweakRacer If the propellor is wrong direction, just swap any two of the three wires from between the ESC and motor. Then the motor will run in the opposite direction and work fine with the propeller.

2018-09-24 07:25:20 Yararlı (0)
Gönder
cevaplar (2)

TweakRacer Now no PNP is even available as an option. WTF? And now even the kit is pushed back to 10/10/18? I wanted to buy the blue PNP, but I give up.

2018-09-23 04:25:49 Yararlı (1)
Gönder
cevaplar (1)

TweakRacer Now no PNP is even available as an option. WTF? And now even the kit is pushed back to 10/10/18? I wanted to buy the blue PNP, but I give up.

2018-09-23 04:25:49 Yararlı (1)
Gönder
cevaplar (1)