Tüm Mesajlar

handstek std is for quad copters no 5v on outputs . wing is for plane as it has 5v voltage out for servos

2018-11-22 08:04:49 Yararlı (1)
Gönder
cevaplar (3)

Q: How many bits resolution of ADC?

Soran Woodchuck Açık 2020-08-18 11:18:05

suzdaliev According to chip datasheet, it is 20-channel 12-bit adc seems pretty nice

2020-09-01 03:23:03 Yararlı (1)
Gönder
cevaplar (2)

Q: plz give wiring diagram

Soran AJITHKUMAR Açık 2018-12-11 01:36:36

Woodchuck If there is an input-output legend on on the silkscreen layer of my board, it would have to be underneath the connector blocks. I determined the correct connections by looking at the traces on the solder side of the board and the polarity of the electrolytic capacitors. Ground is common to power input, signal input, and signal output. The rest is determined by process of elimination.

2020-01-30 01:44:30 Yararlı (0)
Gönder
cevaplar (5)

Q: Do you solder wires to the board or do you use spring-loaded pins?

Soran Woodchuck Açık 2018-11-20 01:04:23

Brou haha You can solder wires to the board.

2018-12-04 02:25:03 Yararlı (0)
Gönder
cevaplar (1)

Q: For electrical connections, do I use solder or spring-loaded pins?

Soran Woodchuck Açık 2018-11-20 12:56:44

Mcmclendon I think you can use solder.

2018-12-04 02:24:40 Yararlı (0)
Gönder
cevaplar (1)