BG193217494
İçeriklerim
Tüm Mesajlar
İncelemeler
Yorumlar
cevaplar
Sorular

Tüm Mesajlar

BG193217494 17/06/2022
flies very light on the wing loading. the flying weight in the manual is grossly understated. i am using a 3s 1000 battery and still needed to add 5, 1/4oz weights to balance the aft end of the range
F3P 840mm Kanat Açıklığı Yerçekimi Serbest Vektör 3D Akrobasi EPO RC Uçak Sabit Kanat KIT/PNP
US$129.99
0
Tavsiyeler
Yorumlar (0)
BG193217494 19/10/2020
is this a trainer: No, here’s why. 1. it does not come with any instructions. Most people buying trainers need something that is almost ready to go, not a box full of parts. It also does not have molded in hinges on the control surfaces. you will have to cut/slot/glue your own CA hinges on. the elevators are split with no hardware or allowance to have a pass though the rudder, it will take a lot of fiddling to get this right. the landing gear is also REALLY tall, like almost impractically tall. I may have to re-bend and shorten it to use larger wheels for grass and have it be reasonable. 2. the design does not lend itself to be self stabilizing. don’t forget back before the days of electronic gyros a trainer had a high dihedral angle to be self stabilizing. this wing is flag. it will never just cruise around, you will always have to fly it and that’s not what a beginner wants. with all this being said, it appears to be a good plane for what you get, it won’t be a throw it together in one night kind of plane. it looks like a bigger version of the MG-800 from last year with a canopy so you don’t have to take the wing off to put the battery in. if it flies descent it will probably end up my ski plane for this winter when the snow shows up.
Şeytan Kral EPO 1020mm Kanat Genişliği Giriş Eğitim Makinesi Elektrikli Model Sabit Kanatlı RC Uçak KIT
US$120.99 US$145.19
1
Tavsiyeler
Yorumlar (2)
BG193217494 04/06/2020
the plastic parts are 3D printed not molded. the main piece that holds the servos is a horrible design. no 5g servo will fit without significant cutting and hacking. the rest of the plane went together well, there are no instructions. I found some picture instructions for it on another site selling it. the CG is too far aft. By the 30% chord rule the cg should be 2 5/16” from the leading edge which balances perfectly with a 2s 1000 and the recommended motor. I have not flown it yet because I’m waiting for bullet connectors for the speed controller but it passes the glide test and seems light enough it should be a good first plane for my son to fly around
Küçük Güvercinler 800mm Kanat Açıklığı EPP Sabit Kanat RC Uçak Kit Eğitmen Için Acemi
US$43.99 US$52.79
2
Tavsiyeler
Yorumlar (1)
BG193217494 04/06/2020
The foam moldings are of a good quality. mine didn’t have both wings and the “interchangeable” hardware. An 11 blade 64mm fan will not fit. The outside of the tube is too big only a EDF with a 66mm od will work. The assembly was straight forward and the setup instructions were clear. the decals are good quality and fit with minimal bubbling. I am excited to try flying it.
Zeta Ultra-Z Blaze 790mm Kanat Açıklığı EPO Uçar Kanat İtişli Jet Yarışçı RC Uçağı KİT
US$87.99 US$105.59
8
Tavsiyeler
Yorumlar (2)
BG193217494 04/12/2019
this is not a first airplane. it has no self stabilizing tendencies (no dihedral to auto level) so you have to fly it all the time. that being said it is a good second or 3rd airplane depending on your prior skill. I am running mine on a 1650kv motor and 30a esc and 1300mah 3s. I don’t see how you could fit anything bigger in. I started with a ep8060 prop and it was too much, it melted the hot glue holding the esc in. I stepped it down to an apc 7x6E which is better but still too much prop for my combo. I have apc 7x4E props on the way which I think will be just right. I couldn’t get the wood flap to stay glued onto the wing so I am using single #64 bands to hold the wing down. I added 2 1x6mm 500mm long carbon strips in the wing. the receiver is in the pocket for the center servo and I didn’t need any servo extensions. I am using 2.25 inch tires and I think it will handle grass ok. it has snowed for the winter so I am on skis now which it handles good. The springs on the skis have a tendency to nose it over but I need the angle. it has great aerobatic potential and I think it will be a favorite little park Flyer. it’s just the right size to keep around. mine was built with rudder from the start. it doesn’t need it in the air but makes ground handling fun. I added some holes for cooling air and a scoop out of lexan scraps it should help with temperatures along with the prop change.
MG-800 MG800 800mm Kanat Aralığı EPO Eğitmen Başlangıç Sabit Kanatlı RC Uçak Uçak Kiti
US$82.40 US$80.39
5
Tavsiyeler
Yorumlar (0)
2.4G 4CH Mikro Düşük Voltaj DSM2 DSMX Uyumlu Alıcı İçindeki Fırçalı ESC
US$33.20 US$39.99

Q: did anyone figure out how to get the servos to work? I got the motor working by bringing the trim all the way down but no luck on the servos, yet.

Soran BG193217494 Açık 2020-10-20 12:47:36

ken53 You have to use low voltage servos.

2020-10-20 02:14:10 Yararlı (0)
Gönder
cevaplar (1)
Şeytan Kral EPO 1020mm Kanat Genişliği Giriş Eğitim Makinesi Elektrikli Model Sabit Kanatlı RC Uçak KIT
US$120.99 US$145.19

Q: The model kit was delivered without a manual. Is a manual download available? I would like to know where the center of gravity is.

Soran BG222069245 Açık 2020-10-11 04:18:53

BG193217494 I just got mine, no manual. Center of gravity is between 20-30% of the mean aerodynamic chord. Since this is a square wing at the fuselage and calculate the length. Once you have this number it should be on or real close to the spar.

2020-10-19 09:17:22 Yararlı (4)
Gönder
cevaplar (2)
Eğitmen Başlangıç İçin Fun Cub 1100mm Kanat Aralığı EPO Tek Kanatlı Eğitim Uçağı RC Uçak Kiti
US$113.99 US$136.79

Q: Are there optional floats available for this plane? Thanks.

Soran Grant Açık 2020-06-28 03:54:05

BG193217494 It looks like the floats from the HZ super cub lp would work but a rear mount would need to be fabricated.

2020-07-02 08:01:13 Yararlı (1)
Gönder
cevaplar (1)
BG193217494 04/06/2020
the speed control didn’t come with any motor leads, which it didn’t say in the description so I had to wait again to finish the project it’s going in while more connectors are in the mail.
HTIRC Hornet Serisi 12A 2-4S Fırçasız ESC, RC Modelleri için 5V/1A BEC ile
US$14.99 US$17.99
0
Tavsiyeler
Yorumlar (0)
Heng Long 3810 63CM 2.4G Uzun Süreli Kontrol Yarış RC Botu Su Soğutma Sistemiyle
US$150.99 US$155.99

Q: is it proportional control?

Soran captputt Açık 2019-07-01 07:16:17

Steve No. Steering has three positions left, center and right. Throttle has 5. Stop, slow forward, slow reverse, fast forward, fast reverse. The water cannon has on and off.

2020-05-27 04:49:53 Yararlı (2)
Gönder
cevaplar (2)
BG193217494 21/11/2019
package was very mangled. no outer packaging just thrown in a plastic bag. luckily nothing inside was damaged.
PZ 2.5g Servo Analog Plastik Dişli Molex pico 1.25mm / TJC8 2.54mm için RC Drone Araba Robot Uçak Uçak Sabit Kanatlı Düzlem
US$4.42 US$5.36
0
Tavsiyeler
Yorumlar (0)
BG193217494 15/11/2019
works as expected. smooth throttle and was just the right size for the profile foamie I put it in.
Hobbywing Skywalker 2-3S 20A Fırçasız ESC, 5V/2A BEC ile RC Uçak Modelleri İçin
US$14.96 US$27.99
0
Tavsiyeler
Yorumlar (0)
BG193217494 22/10/2019
I used them in my EPP Yak 55. so far they are holding up well. they have good speed for a 3D plane and plenty of torque
6 ADET Racerstar MG90S 9g Mini Metal Dişli Analog Servo 450 RC Helikopter RC Araba Tekne Robot için
US$20.99 US$27.99
0
Tavsiyeler
Yorumlar (0)
BG193217494 22/03/2019
this is my first time trying a non sponge tip cleaner. I will see how it goes my iron has to be re-tinned frequently.
1PC Ağır Hizmet Löter Lehim İp Temizleyici Çelik Tel Löter Malzemeleri
US$8.99 US$14.99
0
Tavsiyeler
Yorumlar (0)
BG193217494 04/09/2019
should work well for a nice table top camera stand and when folded up will work as a mini vlog handle.
Gopro Kamera/Cep Telefonları/Dijital Kameralar için Mini Masaüstü Tutamaç Üçlü Tripod
US$7.99 US$9.59
0
Tavsiyeler
Yorumlar (0)
BG193217494 04/09/2019
looks like it will work well. it is machined from thick sheet stock. time will tell how it holds up over time.
RC Drone FPV Yarış için M2 M3 M5 M6 Vidaları Anahtarı Süper Anahtar Karbon Fiber Hızlı Montaj Aracı
US$8.99 US$10.99
0
Tavsiyeler
Yorumlar (0)

Uzmansın, yardım edebilir misin?

Sizi Davet Yanıtı e-postasına abone olmaya içtenlikle davet ediyoruz!

Abone olursanız, sizi e-posta yoluyla insanların ürünlerle ilgili sorularını yanıtlamaya davet edeceğiz. Size abone olarak] ayrıca "Yararlı Rozeti " kazanacaksınız! Gizlilik ayarları sayfasından istediğiniz zaman aboneliğinizi iptal edebilirsiniz.

Başkalarına yardım edin ve daha mutlu olun!

  • Abone ol

Rozetler Hakkında

Rozetler toplulukla ilgilidir ve kullanıcılar kaliteli içerik oluşturarak, görevleri tamamlayarak veya özel etkinliklere katılarak rozet kazanırlar. Belirli kişilerin kendi özel rozetlerine sahip olmaları gerekir.
CEO ROZETİ

The CEO ünvanı yalnızca Banggood patronuna aittir.

Kazanabileceğiniz rozetler yakında geliyor
  • TAMAM

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • TAMAM

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe