Tüm Mesajlar

Reese_000 assuming that you are talking about the RC832 FPV receiver, you should be able to stick the RCA jack from the monocular into the middle jack in the rc832 receiver. If you are talking about a different receiver and have AV cable outputs, then you can get an AV to RCA adapter and it should work fine, or you can cut the RCA cable and solder the video wire from the RCA cable to the yellow AV cable.

2021-12-17 05:42:48 Yararlı (0)
Gönder
cevaplar (1)

Q: What is the pin-out for this device

Soran orclah Açık 2021-10-03 01:18:43

Reese_000 it has positive, negative, and analog video.

2021-10-03 04:28:46 Yararlı (1)
Gönder
cevaplar (3)

Reese_000 480p is the only resolution for this specific display but you might be able to find other products with slightly higher resolution elsewhere

2021-02-18 05:14:23 Yararlı (0)
Gönder
cevaplar (1)

Q: Who knows how much weight this thing can carry

Soran GEO_KIT Açık 2021-01-05 08:58:01

Reese_000 none it can barely carry the camera. I bought some slightly larger than stock batteries and it kept falling out of the air at max throttle.

2021-01-05 01:37:04 Yararlı (1)
Gönder
cevaplar (3)

Q: What Google's do you recommend

Soran BG401044834 Açık 2020-04-21 01:38:39

Reese_000 most people would probably recommend the EV800D or EV800. EV800D has dvr and diversity antennas for better directional range compared to the EV800.

2020-04-22 11:43:55 Yararlı (0)
Gönder
cevaplar (6)

Q: Is the av cable 2.5mm or 3.5mm

Soran Reese_000 Açık 2020-03-30 09:45:36

rafhit 3.5mm

2020-04-02 04:05:37 Yararlı (1)
Gönder
cevaplar (1)

Q: Will the Caddx EOS2 work with this drone

Soran Reese_000 Açık 2019-10-19 12:58:09

Samchan It can not fit.

2019-10-29 10:47:41 Yararlı (0)
Gönder
cevaplar (1)