bopih
İçeriklerim
Tüm Mesajlar
İncelemeler
Yorumlar
cevaplar
Sorular

Tüm Mesajlar

bopih 14/11/2020
bought the flysky version. before you buy this, please read the reviews by buyers, especually on issue of the micro usb port via jst type head. for me, i dont like to solder into the fc board, so i diy the usb cable using the correct size jst i bought specially for this purpose. i actually bought a few sizes because i was not sure which one will fit. once i managed to connect into betaflight, after all those com port issues, and done flashed latest version firmware, then the rest of the steps including binding with my jumper t8sg was easy. flight is good and stable with racerstar 8520 motors from banggood. i used an eachine m80 85mm frame which is too big and does fit. i just secure the FC with cable ties and hot glue. will buy different frame later. still waiting for other parts ie vtx camera for my fpv. recommended buy.
F3_EVO_BRUSHED 1S 3.7V Uçuş Kontrol Cihazı 29mm Eachine Turbine QX70 DIY Micro FPV Racer Drone için Dahili Frsky/Flysky Alıcı RX
US$18.99 US$27.99
7
Tavsiyeler
Yorumlar (4)
bopih 08/11/2020
this is my first hobby grade transmitter. superb quality for the price. brand new, sent in a sealed box. and, no scratches on the lcd screen! i am actually a bit concerned because quite a few buyers commented on this issue. so far, i manage to bind with eachine e016h, wltoys v988, and my 2 micro whoops using flysky receivers. far nicer controls sticks compare to the toy level transmitters included with the heli. smooth. i tried to play fpv sim on my pc but i could not manage to get a working config and calibrate..the sim keep on getting the axis messed up bad..maybe my own fault. i used 2 18650 batteries using the given holder. best buy. recommended.
Jumper T8SG Plus V3 Carbon Special Edition Hall Gimbal Multi-protocol Advanced Radyo Flysky Frsky FPV RC Uçak Parçaları için Verici
US$128.99 US$154.99
9
Tavsiyeler
Yorumlar (3)

bopih please refer to the youtube by fellow buyer.

bopih 14/11/2020
bought the flysky version. before you buy this, please read the reviews by buyers, especually on issue of the micro usb port via jst type head. for me, i dont like to solder into the fc board, so i diy the usb cable using the correct size jst i bought specially for this purpose. i actually bought a few sizes because i was not sure which one will fit. once i managed to connect into betaflight, after all those com port issues, and done flashed latest version firmware, then the rest of the steps including binding with my jumper t8sg was easy. flight is good and stable with racerstar 8520 motors from banggood. i used an eachine m80 85mm frame which is too big and does fit. i just secure the FC with cable ties and hot glue. will buy different frame later. still waiting for other parts ie vtx camera for my fpv. recommended buy.
F3_EVO_BRUSHED 1S 3.7V Uçuş Kontrol Cihazı 29mm Eachine Turbine QX70 DIY Micro FPV Racer Drone için Dahili Frsky/Flysky Alıcı RX
US$18.99 US$27.99
7
Yorumlar (4)
F3_EVO_BRUSHED 1S 3.7V Uçuş Kontrol Cihazı 29mm Eachine Turbine QX70 DIY Micro FPV Racer Drone için Dahili Frsky/Flysky Alıcı RX
US$18.99 US$27.99

Q: is the lipo plug already soldered to the board?

Soran Skytalon74 Açık 2018-04-23 05:52:18

bopih No. You have to solder the lipo plug to the FC board yourself. Not too difficult.

2020-12-29 09:46:37 Yararlı (1)
Gönder
cevaplar (4)
bopih 14/11/2020
this is my first time buying a complete fpv. very cheaply price and suitable for fpv beginners like me. bought flysky version. with this fpv, i learn how to flash the flight control board via micro usb and betaflight/cleanflight, tweak basic inflight settings, troubleshoot binding issues with my jumper t8sg, changed my first burnt motor, and cutting tiny cables and soldering works. can fly okay. seems a bit underpower at times carrying the vtx and cover. maybe will try upgrading the motors or change into bigger frame later. a few cons..first, only one battery. second, the vtx keeps on getting interference and most of the time unusable when i the motors are running. i swap the vtx cam with a cheap eachine tx04 camera and the problem is gone. highly recommended buy. really learnt a lot basic stuff with this fpv. now i can buy parts and try assemble my own diy fpv. peace yo
X36S Kanallı 65mm 5.8G CMOS 800TVL 40CH 25mW Mikro FPV F3 FC Çekirdeksiz Yarış RC Drone Quadcopter BNF
US$29.99 US$32.99
2
Tavsiyeler
Yorumlar (0)
bopih 08/11/2020
this is my second rc heli. i am actually very new to rc flying. for me, it is difficult to choose the best among the available competing rc helis at this price range. and I am glad i chosed this instead of v911s. binded this v988 with my jumper t8sg transmitter and it works smooth and flawless after a few trims. no auto hover or hold hover which is fine. auto hover do gets boring after a few days. got 1 lipo only with the price. but that is okay because i got a few extra lipos taken from my micro whoops. recommended buy. fun to fly. flight time is around 5 minutes but it is fine.
WLtoys V988 Güç Yıldız 2 4CH 6 Eksen Gyro Flybarless Helikopter RTF
US$49.99 US$63.59
0
Tavsiyeler
Yorumlar (0)
bopih 08/11/2020
shipping time as promised. all motors works good on my 85mm micro whoop frame. been flying for 20 minutes a day for few days, and the motors are able to keep up. motors are warm to the touch after every 3-4 minutes of flying, in between lipo swap. will definitely buy a few more for spare parts. recommended.
Eachine QX80 DIY FPV Quadcopter için 4X Racerstar 8520 8.5x20mm 53500RPM Çekirdeksiz Motor
US$18.99 US$23.99
0
Tavsiyeler
Yorumlar (0)
Eachine E129 2.4G 4CH 6-Eksenli Gyro Yükseklik Tutma Flybarless RC Helikopter RTF
US$62.00 US$68.99

Q: Can I bind this to Flysky 9ch transmitter?

Soran BG353621144 Açık 2020-10-18 11:13:11

BG391123814 i dont think so. i cannot bind this with my jumper t8sg. unrecognised protocol. i am going to get a futaba receiver, install it into the e129 and get it bind with my t8sg.

2020-10-24 12:29:57 Yararlı (0)
Gönder
cevaplar (11)

Uzmansın, yardım edebilir misin?

Sizi Davet Yanıtı e-postasına abone olmaya içtenlikle davet ediyoruz!

Abone olursanız, sizi e-posta yoluyla insanların ürünlerle ilgili sorularını yanıtlamaya davet edeceğiz. Size abone olarak] ayrıca "Yararlı Rozeti " kazanacaksınız! Gizlilik ayarları sayfasından istediğiniz zaman aboneliğinizi iptal edebilirsiniz.

Başkalarına yardım edin ve daha mutlu olun!

  • Abone ol

Rozetler Hakkında

Rozetler toplulukla ilgilidir ve kullanıcılar kaliteli içerik oluşturarak, görevleri tamamlayarak veya özel etkinliklere katılarak rozet kazanırlar. Belirli kişilerin kendi özel rozetlerine sahip olmaları gerekir.
CEO ROZETİ

The CEO ünvanı yalnızca Banggood patronuna aittir.

Kazanabileceğiniz rozetler yakında geliyor
  • TAMAM

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • TAMAM

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe