Tüm Mesajlar

Pilina Thechassis is made from nylon ... It is pretty durable and took some abuse already, but there is no metal in it.

2020-09-27 02:34:22 Yararlı (0)
Gönder
cevaplar (1)

Q: Can I check if the transmitter is mode 1 or mode 2?

Soran teddyho99 Açık 2020-09-26 10:41:48

VirginiaJim The Volantex V761-1 (Firstar) has Mode 2 controls (throttle on the left), but because this is a 3 channel plane, the elevator AND rudder are on the right side. The wings have a cutout for ailerons but no hardware. Enjoy. - Jim

2020-09-27 02:08:32 Yararlı (0)
Gönder
cevaplar (1)

quadcopter101 There is no tripod mount with these goggles as the ad infers. They were probably thinking of adding it at one time, but it never was implemented in production.

2020-09-24 07:52:25 Yararlı (0)
Gönder
cevaplar (2)

Q: looks like multi module works for this chip!!

Soran elvill Açık 2020-04-14 05:41:50

VirginiaJim So, DOES the multiprotocol module work with this plane??? If it DOES, then experienced pilots would be able to buddy box these planes to better instruct newbies how to fly them. For that matter, is this transmitter actually a 2.4ghz technology that will enable multiple identical planes to fly simultaneously without interfering with each other?

2020-09-22 01:25:26 Yararlı (0)
Gönder
cevaplar (1)

Q: hi good day......this transmitter can i change to my rc truck

Soran Jhon D. Sabanal Açık 2018-05-12 04:39:50

VirginiaJim You need to check what protocol your truck uses. If it is AFHDS 2A, this Tx should work. Otherwise you will need to replace the truck's receiver.

2020-09-19 05:13:00 Yararlı (0)
Gönder
cevaplar (3)

Q: Are all the internal gears metal too?

Soran VirginiaJim Açık 2019-09-04 06:16:23

stevepayor I opened one up, and found all the gears are metal, except for the first large gear (nylon) driven by the motor pinion (brass). This is OK because the torque is low here, and the nylon gear helps keep the drive silent. All of the following gears in the gear train, running at higher torque, are metal.

2019-09-04 08:46:43 Yararlı (10)
Gönder
cevaplar (5)

Q: Does this WiFi amplifier work on both the 2.4 & 5 GHz bands?

Soran VirginiaJim Açık 2020-09-09 04:05:05

BG484816493 Noonly 2.4 GHz

2020-09-09 09:24:03 Yararlı (1)
Gönder
cevaplar (1)

Q: can I use it with my Android phone

Soran Gaurav kumar Açık 2018-08-25 01:53:31

VirginiaJim You could use this camera if it is connected to a 5.8ghz video transmitter, and you use the ROTG01 receiver, which has an output for more recent (2yr) android cell phones. Should work with Android 8.0 phones or higher. Suggest using video transmitter that runs on 7.4v or higher since these cameras require more than 5v, despite what the specs show. - Jim

2020-09-08 03:32:19 Yararlı (0)
Gönder
cevaplar (2)

VirginiaJim In my experience with 3 orange labeled Eachine 1000TVL cameras, none of them work with 5v supplied. They give a black screen. If you can still find the earlier white label of this camera (I have one), mine works with 5v input. Cheers. - Jim

2020-09-08 03:27:55 Yararlı (0)
Gönder
cevaplar (2)