En iyi fiyatlar KV226-8 Tel Konnektörler - Banggood Turkey Online Alışveriş

Bayel

İçeriklerim: Tüm Mesajlar; İncelemeler; Yorumlar; cevaplar; Sorular

Tüm Mesajlar

LUSTREON KV226-8 Hızlı Yerleştirme Tel Konnektörler Push-in İletken Terminal Bloğu 0,5-6mm² Kablo Elektrik Kablo Bağlantıları Konnektörler M3 Vidalar Sabitlenebilir

Q: what is the difference between the options "fixed" and "Regular" ?

Soran Bayel Açık 2021-07-21 04:47:03

Gönder

cevaplar (0)

Bayel 09/08/2020

Shipping took 3 work-days and the printer came partly assembled and nicely packaged. The printer has a steel sheet-metal frame with some magenta-metallic aluminum parts and some 2020/2040 aluminum V-Slot profiles. Stiff coupler for the z-Motor and ferrules! The frame is reasonable stiff for a printer and the assembly was easy thanks to the great pdf-manual on a SD-Card and the video on the Biqu-youtubechannel. Every bag of screws is labeled and you also get some spares as well as any tool or wrench you need. The Cablemanagement is great and you are supplied with enough cableties. The type-C cable makes maintanance on the hotend easy and you dont have to deal with multiple cables at all. My bowden was a little short and was bending a bit much, 5cm longer would solve this. The hotend is a grub screw clamped V6 hotend 0.4mm nozzle and two spares. The heatbed is a 3mm aluminum-PCB with a magnetic pad and a springsteelsheet. It works very well and heats up to 250°/80° in 5-7 min. Unfortunately my bed is not flat, so at some point I will have to buy a BL-Touch for autoleveling to compensate that. The TMC-Driver make this printer as silent as a Prusa but this is mitigated by the case and driver-cooling fans which are as loud(48dB@1m) as a hairdryer on lowest level. You cant tell if the printer is running or not! These must be replaced if you consider printing in a livingroom. Touchscreen is bright, responsive and has many configuration options. I also had to adjust the steps-per-mm-value of x and y from 81.5 to 80.00 to get my parts to nearly the correct size. I dont understand why they choose these values in the first place since 80.00 is the calculated standard value for this assembly. The printquality is very good and bed adhesion is fantastic. All in all this printer is a very good deal, but it has some flaws which should be fixed or adressed. Its maybe not the best for a total beginner, but with a little bit of finetuning you could turn this into a great printer.

BIQU® B1 İkili İşletim Sistemi Yeni Yükseltilmiş 3D Yazıcı 235 * 235 * 270mm Baskı Boyutu ile SKR V1.4 Anakart / BTT TFT35 V3.0 Ekran / Filament Sensör / Gece Görüş RGB Işık

US$270.00 US$407.53

25

Yorumlar (1)