En iyi fiyatlar PCB Termal Transfer Kağıdı,Batarya Koruma Kartı

MartinC 10/04/2019

Used this for the first time today, worked far better than I expected, laser printed a small circuit, taped it to pcb material that had been cleaned with alcohol following cleaning with fine steel wool and then ironed it in place. The backing paper peeled clean off and left an accurate pcb mask on the copper. I etched with ferrous chloride and was left with a perfect pcb. Only criticism was that the paper was poorly protected in the post and `i had to leave it under a heavy weight for a few days to flatten it to an acceptable level to be used in my HP laser printer. I found that my printer will take these A4 sheets cut into quarters, i.e. A6. this makes it a lot more economical to use. My next experiment is to see if it can be re used for another copy of the circuit. I will definitely be buying more of this in the future.

DIY Elektronik Prototip Mak PCB Devre Kartı İçin 10 Adet A4 Levha Isı PCB Termal Transfer Kağıdı Toner

3,22€ 4,14€

1

Yorumlar (0)

MartinC 12/02/2019

I use these with salvaged Li-ion/ Li-Po cells along with a small boost converters to power LED’s in 3D printed light fittings and displays.

10 Adet TP4056 Mikro USB 5V 1A Lityum Pil Şarj Koruma Kartı TE585 Lipo Şarj Modülü

9,22€ 11,06€

0

Yorumlar (0)

MartinC 25/03/2019

These are a direct replacement for Gilllette blades and seem just as good only a fraction of the price.

GFLV® 16 Adet 5 Katman Jiletler Traşlı Tıraş Makinesi Gillette için Tıraş Başları Değiştirme

18,44€ 27,67€

0

Yorumlar (0)

MartinC 29/05/2019

excellent little lights, quite bright on full brightness but even on a lower setting to conserve battery life the are bright enough to achieve a good effect. remote control works well and at a reasonable range. haven’t tried submerging them yet but have been left outside for a week in heavy rain with no ill effects.

10X Uzakdan Kumanda Su Geçirmez RGB Dalgıç LED Mum Çay Işık Masa Lamba Dekorasyon

11,38€ 12,61€

0

Yorumlar (0)

MartinC 01/08/2019

neat little module, easy to set up and use.

3 Adet DS3231 AT24C32 IIC Real Zaman Saat Modülü Arduino için Geekcreit - resmi Arduino panoları ile çalışan ürünler

5,19€

0

Yorumlar (0)

MartinC 01/08/2019

neat little unit. does what I need it to.

Geekcreit® LCR-T4 12864 LCD Grafik Transistör Test Cihazı Direnç Kapasitans DSE SCR Metre

14,74€ 16,60€

0

Yorumlar (0)

MartinC 01/08/2019

As described. fit breadboards well.

120 adet 20cm Erkek-Erkek Renkli Breadboard Jumper Kablosu Dupont Tel

5,53€ 6,45€

0

Yorumlar (0)

DC-DC Ayarlanabilir Güç Kaynağı Buck Dönüştürücü Adım Aşağı Modülü

7,37€ 9,22€

Q: What is the EN pin on the input for?

Soran MartinC Açık 2019-04-18 01:57:42

APteH EN is chip enable. A high is Enable, low is disable

2019-05-20 06:42:31 Yararlı (2)

Gönder

cevaplar (3)

MartinC 10/04/2019

Perfect for cleaning up holes in models that have been 3D printed. I now deliberately make the holes a fraction smaller than needed so that I can use this tool to achieve perfect holes.

DT01 Kenar Oyucu Profesyonel Raybalama Evrensel Delik Matkap Parçalar 0-14mm Açıcı Oyucu

7,37€ 9,22€

0

Yorumlar (0)

MartinC 25/03/2019

excellent for micro controller projects suck as arduino controlled lighting.

5V 1 Kanal Seviye Tetikleme Optokuplör Röle Modülü

3,68€ 8,29€

0

Yorumlar (0)

MartinC 25/03/2019

excellent. use them for running esp8266 based projects from mains supply. such as Alexa controlled sockets and lights.

3 Adet 5V 700mA 3.5W AC-DC Adım Aşağı Yalıtımlı Anahtarlamalı Güç Kaynağı Modülü

9,22€ 11,06€

0

Yorumlar (0)

MartinC 25/03/2019

exactly what they claim to be, good selection of cheap resistors. you just need to find an appropriate method of storage as they are just strips of resistors.

1000Pcs 5% 1 / 2W 0.5W Metal Film Direnç 50 Değerler Çeşitli Kit 0.1 ohm ~ 4.7M ohm Kapasitör

12,91€ 15,67€

0

Yorumlar (0)

MartinC 12/02/2019

I used one of these to repair a faulty touch sensitive lamp and it fitted as a direct replacement. This has 3 light levels as opposed to just the on/off unit that it replaced. Be aware that it is not suitable for led or cfl lamps, just filament or halogen bulbs. I think that is how the original one was destroyed.

AC 220V 3 Yollu Dokunmatik Kontrol Sensörü Anahtarı Dimmer Lambası Masa Işık Parçaları

6,45€ 10,14€

0

Yorumlar (0)

MartinC 09/02/2019

Used this to power an LED display light, measured capacity appears to be 1750 mAh when measured using a TP4056 as charge controller and discharging at a current of 40 mA.

Eachine EV800 FPV Gözlük Yedek Parça 3.7V 2000mAh Lipo Batarya

10,53€ 12,63€

0

Yorumlar (0)

MartinC 16/10/2018

I have bought several of these and so far they have all been reliable. I use them with usb led light bars for under cupboard lighting. they get quite warm after prolonged use at 5w output but remain reliable up to now. (about a month of every day use) will definitely order more.

İngiltere Ev Duvar 3 Pin USB Tak Güç Adaptörü Şarj Aleti iPhone 6S Plus Cep Telefonu Tablet için

1,84€

0

Yorumlar (0)

MartinC 16/10/2018

this is my second batch of glue, use it for insulating electrical repairs and projects as well as general purpose hobby use. with a variable temperature gun this can be used either hot and very fluid or cooler and bulky, either way it sticks extremely well. can be rather stringy at lower temperatures but not difficult to deal with with practice.

10pcs 11mm x 247mm EVA Clear Hot Melt Glue Adhesive Sticks For Glue Gun

9,00€ 14,75€

0

Yorumlar (0)

MartinC 28/06/2018

accurate and bright display. use this wiring diagram but ignore the shunt.

Çift Kırmızı Mavi LED Sayısal Voltmetre Ampermetre Paneli Volt Ölçüm Cihazı

6,92€ 8,30€

4

Yorumlar (0)

MartinC 20/03/2018

Especially as these come with the appropriate spare mandrels these make a cheap way of topping up your sanding drums, far cheaper than buying locally and of comparable quality. I use these in a Dremel but I believe they will fit any similar rotary tool. My wife also uses them in her electric nail tool for when she is dealing with acrylic nails. I have bought her her own set so I don't have to keep searching for mine!

Dremel Rotär Aletlere Uygun 1/2 3/8 1/4 inç Zımpara Mandreli 102 Parçalık 120 Zımpara Tamburu Seti

11,98€ 11,06€

0

Yorumlar (0)

MartinC 20/03/2018

These are not very sturdy but more than adequate for small components.

5 Adet Geekcreit® 24 Değerli Elektronik Bileşenler Depolama Çeşitleri Kutu

18,44€ 22,13€

0

Yorumlar (0)

MartinC 20/03/2018

I use these when I need to use AA or AAA batteries in 3D printed projects. More than adequate for this purpose, easy enough to include 1s,2s,3s or more cell holders in designs. I have even used them for 18650 cells in low current applications as I don't think they would be up to carrying any more current than a typical AA cell can deliver due to the thin material they are made of.

10 Çiftler Gümüş Tonlu Metal Batarya Bahar Kap AA AAA Bataryalar için set

2,76€ 3,68€

0

Yorumlar (0)

Banggood'a hoş geldiniz,

BGMH'ye İzin Veriyorsunuz

Tüm Mesajlar

Uzmansın, yardım edebilir misin?

Rozetler Hakkında

About Badges

Helpful Badges

Are you ready to help?