En iyi fiyatlar Fener Aksesuarları,Fener Aksesuarları,3 boyutlu yazıcı

Hendrix 05/04/2018

Very well machined button and a nice improvement over the stock rubber button. It has a good feel to it and looks very good on my S2. Very happy with this purchase.

S2+ Kırmızı/Yeşil/Mavi/Gümüş/Kum El Feneri Aksesuarları için Convoy Metal Tıklama Anahtarı DIY

5,53€ 7,37€

1

Yorumlar (1)

Hendrix 09/04/2018

It fits fine, plenty strong and looks okay imo. Not much to say about a clip.

S2 S3 S4 S5 S6 M1 M2 C8 El Feneri Aksesuarları için Convoy El Feneri Klipsi

5,53€ 7,37€

1

Yorumlar (0)

Hendrix 11/04/2018

Took over two months to arrive with over a month and a half stuck in customs because of incorrectly filled out customs form. Assembly was fairly straight forward when using videos found online. Extra screws come in handy and included tools, while cheap as dirt, were a nice bonus. Included SD card was junk and didn't work at all. Took about four hours to assemble and first print was acceptable. I was sent UK power cord so I had to supply my own power cord. Very happy with this purchase but the customs debacle stained an otherwise excellent purchase.

Anet® A6 3D Yazıcı DIY Kit 1.75mm / 0.4mm Destek ABS/PLA / HIPS

175,28€ 279,53€

0

Yorumlar (0)

Hendrix 11/04/2018

I don't know how it works but this is a very handy item to have on my work bench.

Degaussing Magnetizer Demagnetizer Vida Sürücü İpuçları Xiaomi Vidaya İçin Manyetik Alım Aracı

3,68€ 11,06€

0

Yorumlar (0)

Hendrix 09/04/2018

Amazing value for a great flashlight. Getting into the settings and changing things is a major pain but eventually I got it setup the way I like. The anodizing has a bit of a powdery finish instead of glossy. I'll have to see how well this holds up over time. This model of the does not support changing to the metal button as there are no threads for the button. The model I have is the 7135x8 which does get a bit warm on full power. The OP reflector throws a very wide beam and perfect for lighting up a large area with a very smooth transition from the center spot.

Takım S2+ Siyah L2 7135x8 3/5mod EDC LED El Feneri 18650

23,05€ 21,21€

1

Yorumlar (0)

Hendrix I meant to say it looks very good on my S2 . It will not fit the S2.

Hendrix 05/04/2018

Very well machined button and a nice improvement over the stock rubber button. It has a good feel to it and looks very good on my S2. Very happy with this purchase.

S2+ Kırmızı/Yeşil/Mavi/Gümüş/Kum El Feneri Aksesuarları için Convoy Metal Tıklama Anahtarı DIY

5,53€ 7,37€

1

Yorumlar (1)

Hendrix 05/04/2018

Machining is excellent and anodizing is perfect match for my black S2. It makes for a very compact EDC flashlight.

Takım S2+ Mavi/Kırmızı-led El Feneri için 18350 Pil Bölmesi

3,04€ 4,73€

0

Yorumlar (0)

Hendrix 05/04/2018

As others have stated the board that is shipped is not the same as the one offered. It does however work okay and looks much better in person than the one in the pictures here, The layout is good and it comes with schematics and a few instructions for setup. It is a very small board and easy to fit into even the smallest of builds. One thing that annoyed me is the boot pads are on the bottom of the board and difficult to access once installed. I soldered two wires on the boot pads and epoxied a small button to the top of the board. OSD works good but it was a huge pain getting a AIO camera to work as I had to disassemble the AIO camera to split off the video feed. In the end I am very happy to finally have OSD on a micro quad. The included buzzer is a nice bonus but it is not very loud. I installed the buzzer although I doubt it will help me locate the quad if lost unless I am standing very close. After upgrading betaflight it took awhile to setup the pids and now my 88mm x-frame flies very nice with this board. I'll be buying more of these with the hope they send me the same one as I received.

Realacc F3 V1.0 Betaflight Fırçalı Uçuş Kontrol Kartı Buzzerli Bütünleşik OSD STM32 F303 MPU600

19,27€ 22,32€

0

Yorumlar (1)

Hendrix I should add that I had to change the plug to work with the rPi.

Hendrix 22/03/2018

Much neater than some other options and runs my rPi with no difficulty.

12V Araba Güç Aktarımı 5V DC-DC Çeviren Dönüştürücü Buck Power Logger Güç USB 5V 3A

6,48€

0

Yorumlar (1)

Hendrix 22/03/2018

Fit my 936/907 clone soldering irons perfectly.

936 937 938 969 Demir ipuçlu Bushing için 4 adet Lehim İstasyonu Demir Kolu Aksesuarları

8,29€ 10,14€

0

Yorumlar (0)

Hendrix 22/03/2018

I mounted two of these to my 3d printer and they give off plenty of light to remove the shadows. No problems with heat and a very low current draw. Not the most durable case but sufficient for my purpose.

30CM 8520 SMD Soğuk Beyaz LED Rijit Şerit Alüminyum Süt/Berrak Kılıflı Tüp Lamba DC12V

7,37€ 9,22€

0

Yorumlar (0)

Hendrix 22/03/2018

The plug was too large for my 936 clone but after changing to the smaller gx-12 it works perfectly. The plug may or not fit your application. The wire is not the best quality and a bit stiff but expected at this price.

907 936 Evrensel Lehimleme İstasyonu için 24V 5 Delikli Dişi Lehimli Demir Sapı

8,29€ 10,14€

0

Yorumlar (0)

Hendrix 22/03/2018

Much neater than some other options and runs my rPi with no difficulty.

12V Araba Güç Aktarımı 5V DC-DC Çeviren Dönüştürücü Buck Power Logger Güç USB 5V 3A

6,48€

0

Yorumlar (1)

Hendrix 22/03/2018

I use it to power two led strips and use a step down converter to run a rPi. No problems with it and in my configuration it runs fairly cool.

AC 85-265V DC 5A için 60W 12V LED Şerit Işığı için Güç Kaynağı Sürücüsü Anahtarlı Lamba Aydınlatma

9,22€ 11,06€

0

Yorumlar (0)

Hendrix 22/03/2018

Fit and finish is comparable to stock Anet A6 extruder. No issues with these.

0,2 mm 0,35 mm 0,4 mm 0,5 mm 3D Yazıcı Ekstruder Pirinç Nozul Sprey Başlığı

5,23€ 7,37€

0

Yorumlar (0)

Hendrix 22/03/2018

A little easier to hold and use than plain wire. Not something that is needed often but they do come in handy.

Ekstruder RepRap için 3D Yazıcı Nozul Temizleme Aleti Matkap Ucu

7,37€

0

Yorumlar (0)

Hendrix 18/03/2018

Good quality silicone wire. No problems with this purchase.

1M 8/10/12/14/16/18/20/22/24/26 AWG Silikon Tel SR Tel

6,02€ 6,45€

0

Yorumlar (0)

Hendrix 18/03/2018

Good quality and individually packaged xt30 pairs. Fit together a bit tight but do loosen up a little after use.

5 Çiftler XT30 2mm Altın Erkek Bayan Kaymayı Önleyen Arabirim Aracı Konektör

8,29€ 10,14€

0

Yorumlar (0)

Hendrix 18/03/2018

A little bit of a rough 3d print but circuit board fits well and holes line up.

Uçak Kumandası Transfer Kartı, RC Drone için 424201 Racing için Emax Femto için Alttan Monte 20x20mm'yi Takın

2,08€

0

Yorumlar (0)

FLF3_EVO_BRUSHED Uçuş Kontrol Cihazı Dahili Flysky 6CH PPM Alıcı AFHDS 2A QX95 QX90 QX90C için

24,90€

Q: DOES THIS WORK ON FLYSKY FS-6S?

Soran siro Açık 2018-03-06 07:26:31

Hendrix If you mean Flysky FS-i6s then yes. It will work on any transmitter that supports AFHDS 2A protocol.

2018-03-09 08:27:29 Yararlı

Gönder

cevaplar (1)

Banggood'a hoş geldiniz,

BGMH'ye İzin Veriyorsunuz

Tüm Mesajlar

Uzmansın, yardım edebilir misin?

Rozetler Hakkında

About Badges

Helpful Badges

Are you ready to help?