Tüm Mesajlar

kyniek I guess you need a kind of light controller. Make a kind of experiment - plug light cable to any different slot on receiver - you will find out that voltage is on all channels - the middle one - signal cable is used for steering.

2021-08-28 05:07:08 Yararlı (0)
Gönder
cevaplar (3)

Q: Hi Can i use this on WPL C24 ?

Soran ArnabSen1991 Açık 2021-07-13 11:07:26

kyniek check what you need. shorter one has length 45mm-50mm , and 2 longer 57mm - 72mm . They are compatible with 2 speed gearbox.

2021-07-13 01:54:09 Yararlı (1)
Gönder
cevaplar (1)

kyniek hi! Receiver board will pair only with MN controller. I bought whole set - receiver and the controller because I wasn't sure if it will pair with my MN 99s controller (I broke receiver ) but it paired with my old controller too. There is no instruction how to pair - only how to connect battery, motor, servo and lights. Will it work with 9.6 battery? I don't know, stock is 2S lipo - 7.4V.

2021-06-14 05:33:39 Yararlı (1)
Gönder
cevaplar (1)

kyniek No,they should work out of the box. You can check if receiver is connected to light controller board - after you will unscrew body and see what is inside you will immediately know what I mean.

2021-03-29 09:37:47 Yararlı (0)
Gönder
cevaplar (2)

Q: What is the battery voltage for this receiver?

Soran BG154620444 Açık 2021-03-20 02:27:10

kyniek I'musing 7.4 li-on battery. BTW - you can use WPL batteries and those from MN models :)

2021-03-29 09:35:42 Yararlı (1)
Gönder
cevaplar (1)

Q: Metar gear?

Soran sbs000311 Açık 2019-10-07 09:20:22

kyniek Itshould has metal gear pinion the same as MN96

2021-01-04 03:52:07 Yararlı (0)
Gönder
cevaplar (2)

kyniek Propablynot. In my servo is quite strong, especially when you consider MN99s as a toy! But... my MN was not ideal - it has small problem with front wheel aligment - I documented problem during making unboxing video and I showed it to bangood staffand ask if I could buy adjustrable steering link alone - to my surprise they decided to send me for free whole metal set - in which was adjustable steering link. Thats OK :) So, maybe you could do similar? Maybe there is problem with servo or something else? Maybe servo has not enough power - then probably receiver could fail?

2020-12-26 06:38:35 Yararlı (0)
Gönder
cevaplar (2)

Q: what’s the voltage of the motor of MN99s ?

Soran BG353322245 Açık 2020-06-02 05:27:42

kyniek 7.4V

2020-12-26 02:20:30 Yararlı (0)
Gönder
cevaplar (2)

Q: Radio is inclued ?

Soran batteman Açık 2019-12-13 09:26:05

kyniek Radiois included, it uses 4xAA , fully proportional.

2020-12-17 06:22:42 Yararlı (0)
Gönder
cevaplar (3)