Tüm Mesajlar

Q: Will this kit work with the JJRC Q*****/16 RC?

Soran ueberte Açık 2018-12-31 10:14:33

CreepyCrawlie if the axle housing is similiar enough to the WPL ones in the correct spots, it will work. i cant say for sure as i do not own the model you refer to.

2022-04-29 02:43:50 Yararlı (0)
Gönder
cevaplar (2)

CreepyCrawlie depends on how you install them... they can be very soft, but they can also be very hard when comparing to the C24 shocks

2022-04-29 02:41:32 Yararlı (0)
Gönder
cevaplar (1)

Q: What motor is suitable to use with this?

Soran receptor74 Açık 2022-04-20 05:05:41

CreepyCrawlie any brushed motor that does not pull over 34A of current constantly so... a lot of different brushed motors

2022-04-29 02:39:43 Yararlı (1)
Gönder
cevaplar (2)

Q: Can I use this set on a JJRC Q60 truck?

Soran BG311338395 Açık 2021-05-28 10:28:17

CreepyCrawlie im not sure as i do not own the Q60 but i believe it should be possible, possibly with some small modifications.

2022-04-12 03:42:55 Yararlı (0)
Gönder
cevaplar (2)

Q: For only one wheel? Or four wheels?

Soran algamdii Açık 2020-09-19 10:05:01

CreepyCrawlie four

2022-04-11 10:53:37 Yararlı (0)
Gönder
cevaplar (3)

Q: Pesquisar em português

Soran BG365410212 Açık 2022-02-26 12:16:45

CreepyCrawlie your question is not exactly a question so it is a little hard to answer

2022-04-11 08:26:19 Yararlı (0)
Gönder
cevaplar (3)

Q: a winch can be attached to the truck

Soran BG115216054 Açık 2021-10-11 05:06:36

CreepyCrawlie with a little modification, yes.

2022-04-02 05:13:45 Yararlı (0)
Gönder
cevaplar (1)

Q: are the wheels/tires on it glued or no

Soran BG202251513 Açık 2021-10-28 05:26:32

CreepyCrawlie no they are not glued as stock. but they do not need to be glued, the RTR tire compound is quite hard and the wheelspeed is relatively low so they do not require any glue. at least as long as you keep the truck stock.

2022-04-02 05:13:13 Yararlı (0)
Gönder
cevaplar (1)