Tüm Mesajlar

Q: what the price in Saudi Arabia rayal

Soran BG225414463 Açık 2022-03-01 03:00:12

maurits About 104.

2022-03-01 11:14:38 Yararlı (0)
Gönder
cevaplar (1)

Q: Why there is no UK plug?

Soran Fai00 Açık 2022-02-01 11:20:23

maurits It seems all the ones with UK plugs have been sold out. Ust get yourself a US to UK adaptor plug. Voltage will be OK since the AC adaptor is rated for 100 to 240 volts.

2022-02-01 12:33:19 Yararlı (1)
Gönder
cevaplar (2)

Q: where I can find BTMate app ? Not available in play store

Soran kdrmanoj Açık 2022-01-15 03:45:37

maurits It seems BTMate is an iOS (Apple) only app. Maybe a similar Android based app will also work.

2022-01-15 04:05:42 Yararlı (0)
Gönder
cevaplar (1)

Q: how much consume power

Soran BG575317420 Açık 2022-01-05 09:18:14

maurits Needs 12V to 24V.

2022-01-10 05:39:50 Yararlı (0)
Gönder
cevaplar (2)

Q: can this work to engrave on gold/silver jewellery?

Soran BG131049114 Açık 2021-12-27 08:29:37

maurits Lasers generally do not do well on reflective surfaces, and metal could be a problem for a weakish laser like this. Maybe one can experiment with temporarily painting the surface with paint, and remove it after lasering.

2021-12-28 04:51:55 Yararlı (0)
Gönder
cevaplar (4)

Q: which kind of cartridge are using for this, magnetic or ceramic?

Soran mailtomejoe Açık 2019-03-13 03:34:32

maurits Probably ceramic.

2021-11-15 08:05:43 Yararlı (0)
Gönder
cevaplar (1)

maurits No, if you look at the picture of the back of the circuit board, you will see that those holes are connected, thus the same terminal.

2021-10-21 09:30:30 Yararlı (0)
Gönder
cevaplar (2)

Q: how can I connect to this amplifier? I mean aux or Bluetooth?

Soran BG131411845 Açık 2021-09-29 07:47:58

maurits This amp does not have Bluetooth, only a wired line level input (3 pin input plug next to volume control) where you can connect your signal source via screened cable.

2021-09-29 08:24:32 Yararlı (1)
Gönder
cevaplar (2)

Q: Can I use a 4 ohm tweeter with this crossover?

Soran BG535015681 Açık 2021-09-20 08:54:51

maurits Yes. But ideally your other drivers should be of the same impedance.

2021-09-21 03:23:08 Yararlı (0)
Gönder
cevaplar (2)

maurits I don't think so. The engraving area is determinded by the length of the different components. Rather buy the bigger version.

2021-09-12 06:22:40 Yararlı (1)
Gönder
cevaplar (2)

The seller Under the chip electrolytic capacitor, I think it has no effect.

2021-08-31 03:51:42 Yararlı (0)
Gönder
cevaplar (1)