En iyi fiyatlar Verici,Verici - Banggood Turkey Online Alışveriş

RabiDeemonbia 03/09/2020

After 2 months this showed up yesterday. I thought I was just going to put it in a box and use it later but on a whim I wanted to know if I could transplant my hubsan x4 107c. so I pulled out the flight controller and LEDs and replaced the power cable with micro jst 2.0 and wired in a micro jst 1.25 for fpv as well as adding micro jst 1.25 connectors for easy motor switching. I assembled the frame with 8.5x20 motors and 48mm 4-blade props. With a 550 mah battery and 15mm 25mW aio camera it's exactly 60g auw and operates for about 2:30. It moves around pretty quickly; much faster and more agile than tiny whoop or x-frame but has a noticeable wobble sometimes. This is with no securing of wires or zip ties on fc so some physical tuning might improve the flight. It's fun to fly, though. Definitely recommend.

Eachine Vtail QX110 Micro DIY Frame Kit 1.5mm 3K Karbon Fiber 14.4g 8520 Coreless Motor Desteği

17,52€ 21,21€

1

Yorumlar (0)

RabiDeemonbia 26/03/2021

This is for the newer model. I had to cut a hole for the charging port and it doesn't quite line up on the switches. But otherwise it's fine.

FrSkY ACCST Taranis Q X7 X7S için yedek Verici Silikon Kılıf Kapağı Parçası

16,60€ 20,29€

0

Yorumlar (0)

RabiDeemonbia 26/03/2021

Narrow, stiff rigid material. It only fits on switches b&c on qx7

10 Adet Kauçuk Verici Kaymayı Önleyici Stick Anahtar Kapağı Flysky Futaba JR Frsky Radiolink için

6,45€ 8,29€

0

Yorumlar (0)

RabiDeemonbia 26/03/2021

Great range

Realacc Triple Feed Patch-1 5.8GHz 9.4dBi Yönlü Dairesel Polarize FPV Pagoda Anten (Fatshark DJI Eachine Goggles için)

14,35€ 24,35€

0

Yorumlar (0)

RabiDeemonbia 26/03/2021

Works well with qx7

Flysky TH9X Frsky X7 X9D Vericisi için 3D Yazıcıyla Üretilmiş Uzaktan Kumanda Rocker Model Kapak

9,22€ 11,06€

0

Yorumlar (0)

RabiDeemonbia 26/03/2021

Works well, easy to bind, never drops randomly

FrSky XM Plus Micro D16 SBUS Tam Aralıklı Mini RC Alıcı RC FPV Yarışı İçin 16 Kanala Kadar

25,00€ 27,67€

0

Yorumlar (0)

RabiDeemonbia 26/03/2021

Outer shell is very nice but a little bulky. The foam is sufficient but cheap. I tossed the flimsy top mat because I have gimbal covers anyway.

Frsky EVA El Çantası Taranis Q X7S / X9D Plus SE Radyo Vericisi için Sert Kılıf

45,20€ 54,42€

0

Yorumlar (0)

RabiDeemonbia 22/11/2020

my first gimbal so I can't compare to others. the movement is smooth but I have trouble keeping the camera center. after calibration it's always pointing 20-30 degrees off. I can kind of correct this by changing the angle limits in arducopter but it still never centers quite right. the instructions it came with were terrible. it seems to work as intended otherwise so I'm going to keep playing with it, maybe recalibrate the sensors

3 Eksen Fırçasız Kamera Gimbal Kontrolör Desteği ile CNC Metal 3-4S 180g Işık GoPro OSMO Action Kameras FPV RC Drone

54,42€ 75,28€

0

Yorumlar (0)

RabiDeemonbia 22/11/2020

ok. probably should have gotten more for the price

RC Drone FPV Yarış Drone için 4 ADET 22XX Serisi Motor Silikon Sönümleme Ped

6,45€ 8,29€

0

Yorumlar (0)

3 Eksen Fırçasız Kamera Gimbal Kontrolör Desteği ile CNC Metal 3-4S 180g Işık GoPro OSMO Action Kameras FPV RC Drone

54,42€ 75,28€

Q: does it just stabilize the camera or can we move it? i have a FS-i6 and 2 knobs are available.

Soran Lostguy220 Açık 2017-12-23 04:41:20

RabiDeemonbia yes you can control the movement of the gimbal using 3 pwm inputs, one for each axis

2020-11-22 11:39:29 Yararlı (1)

Gönder

cevaplar (8)

RabiDeemonbia 23/09/2020

Seem solid. Havent used yet but racerstar has been reliable.

Eachine QX80 DIY FPV Quadcopter için 4X Racerstar 8520 8.5x20mm 53500RPM Çekirdeksiz Motor

17,52€ 22,13€

0

Yorumlar (0)

RabiDeemonbia 23/09/2020

Good props. A little flimsy but good.

Hubsan X4 DIY Quadcopter 720 820 Motorlar için 3X Walkera QR Ladybird Pervane Bıçak Seti 12 Adet

10,14€ 12,91€

0

Yorumlar (0)

RabiDeemonbia 23/09/2020

I was able to figure out the necessary board and libraries and got this working perfectly. It would be helpful if there was even a little documentation. Also a slightly larger device with built in wifi would be amazing.

LILYGO USB Mikrokontrolör ATMEGA32U4 Geliştirme Kartı Sanal Klavye 5V DC 16MHz 5 Kanal

12,91€ 15,68€

0

Yorumlar (0)

LILYGO USB Mikrokontrolör ATMEGA32U4 Geliştirme Kartı Sanal Klavye 5V DC 16MHz 5 Kanal

12,91€ 15,68€

Q: how do i program it

Soran ytgamebeast Açık 2020-02-28 04:37:57

RabiDeemonbia Use Arduino IDE to program. Set Arduino Leonardo as the board. Use Keyboard.h library to inject keystrokes and Mouse.h for mouse movement. I don't know about accessing pins, and the LED is hidden by the case so no using that unless you take it apart.

2020-09-12 04:00:43 Yararlı

Gönder

cevaplar (2)

RabiDeemonbia 15/08/2020

This is my first bf fc, and really my first scratch built drone. It was kind of rough to get it working. Out of box it was incompatible with my spektrum radio (even after binding, the mapping was really messed up). I had to update the fw on both fc and radio, but there were driver issues that needed to be solved to update the fc fw. Once that was dealt with I realized the motors were running backward despite following the wiring instructions correctly. There is a setting in bf to fix the timing difference so I didn't have to resolder but we'll see how well the motors work long term. It took a couple days of troubleshooting but I was eventually able to get my drone airborne for a few seconds. I'm going to need to tune PIDs to make it flyable. As a first attempt I can say making this fc work is difficult just because of how old it is and how little documentation is available, but it is possible.