cirorodrigues
İçeriklerim
Tüm Mesajlar
İncelemeler
Yorumlar
cevaplar
Sorular

Tüm Mesajlar

cirorodrigues 03/07/2021
very nice product, fantastic finish, it's a bit overkill for a hot gun but why not? it's probably the most awesome hot gun available! 😆 When in use, it leaves a thin patch of glue, around 1 or 2 mm diameter, what is very good for small works and details. I'm very pleased with it.
Wowstick Mini Elektrikli Sıcak Erime Tutkal Kalem Gluer 2000mAh Kablosuz Taşınabilir DIY Sanat El Sanatları Tutkal Tabancaları 20 adet Tutkal Sopa ile
US$19.99 US$27.99
0
Tavsiyeler
Yorumlar (0)
ESP32-CAM WiFi + bluetooth Kamera Modülü Geliştirme Kartı ESP32 Kamera Modülü OV2640 Arduino ile Uyumlu Geekcreit - resmi Arduino kartları ile çalışan ürünler
US$17.21 US$23.99

Q: Hello, this module have the correct chip AI thinker?

Soran BG181613554 Açık 2020-10-15 12:15:41

cirorodrigues talvez, mas não usei

2021-06-11 09:41:53 Yararlı (0)
Gönder
cevaplar (6)
Xiaomi Wowstick 1F + 64 in 1 Elektrikli Tornavida Yüksek Hassasiyetli USB Şarj LED Işık 56 Alaşım Çelik Batch Heads DIY ve Ev Onarımı için İdeal
US$65.99 US$79.99

Q: does it have a magnetic tip?

Soran coolpoop9870 Açık 2020-08-03 11:15:13

cirorodrigues sim, vem com um acessório para magnetizar as pontas.

2021-06-11 09:41:05 Yararlı (0)
Gönder
cevaplar (41)
cirorodrigues 26/02/2020
Very nice lamp. Materials seem good enough, I guess it's steel, because of its weight and rigidity. It came almost fully assembled, I just needed to connect the led ring part to the upper arm, what was a easy thing. Once assembled, it keeps correctly the position, screws don't need to be forced, and this indicates a good balance between arms length, weight and springs, I understand the design was careful and correct. The led ring is not too bright but probably it'll be enough to help reading and do so detail work as it won't be the main light for the room. Leds can be adjusted to three different color temperatures ('white', 'yellow' and a mix of both), and can be dimmed as well, using a control in the USB cable. This lamp requires a powered USB port to be attached to (it's not included!), and I used generic spare one I had at hand, with good result. Magnifying glass is fair enough, large, and quite clean at center but is seems to have some distortion at borders, as usual. I'll see later if it helps with some practical work. Overall, good product.
DANIU Esnek Masa Büyük 5X USB LED Büyüteçli 33cm+33cm Braket 3 Renkli Aydınlatmalı Büyüteç Lambası Lup
US$28.99 US$43.99
1
Tavsiyeler
Yorumlar (0)
cirorodrigues 31/01/2020
Very good tool. It's well built, good grip in the handles and can be adjusted to several wires diameter. There a nut to adjust for wire diameter, and it's sensitive, a little rotation changes a lot in the "claws". I tested it with 2.5 and 1.5mm wires and it's very easy to strip. I tried with thin wire (~ 0.75mm) and it was able to strip but I needed to pull the wire, maybe I couldn't adjust it correctly, but the left claw was not able to pull the wire. Overall, great tool for the price.
Çok Fonksiyonlu Otomatik Tel Striptizci Krimp Pense 210mm Yalıtılmış ve Yalıtılmamış Uçlar için Verimli Tel Stripping ve Terminal Krimp Aracı Kolay Kullanım
US$15.99 US$19.99
1
Tavsiyeler
Yorumlar (1)
cirorodrigues 19/11/2020
Very good. I used it to make a security camera and it worked well. For the price, it's quite impressive what this little device can do. It has the camera interface, but it's possible also to setup sensors. Code is upload through Arduino IDE and there's even examples with working webserver. Just need to install esp32 cam add on to Arduino IDE, there are many tutorials in internet, I recommend "Random Nerd Tutorial", they have very good ones.
ESP32-CAM WiFi + bluetooth Kamera Modülü Geliştirme Kartı ESP32 Kamera Modülü OV2640 Arduino ile Uyumlu Geekcreit - resmi Arduino kartları ile çalışan ürünler
US$17.21 US$23.99
1
Tavsiyeler
Yorumlar (0)
cirorodrigues 28/09/2020
I'm very satisfied with this printer, it has a good price, delivery was fast and print quality is very good, even I never printed anything before, did no special adjustments beforehand and I just took default values. The design is good, not many exposed parts and cables are neatly organized. However, I wouldn't recommend it for someone who's not willing or able to assemble it, as it came in a box full of parts, nuts, bolts, cables, and much other stuff. It took me several hours to assemble, following a very detailed video from SuperTechDan (look for it in Youtube), which I strongly recommend for the buyers, and it really requires to put hands-on and be careful not to damage any part. I think this is part of the fun and provides a clear understanding of all parts, but if you want something to print after 30 minutes, I suggest you look for another model instead.
HOMERS/TEVO® Tarantula Pro 3D Yazıcı Kit, 235x235x250mm Baskı Boyutu ile MKS GenL Anakart 0.4mm Volkan Nozul Desteği 1.75mm Filament
US$229.99 US$434.76
8
Tavsiyeler
Yorumlar (4)

cirorodrigues sim, é uma Makerbase MKS SGen L de 32 bits

cirorodrigues 28/09/2020
I'm very satisfied with this printer, it has a good price, delivery was fast and print quality is very good, even I never printed anything before, did no special adjustments beforehand and I just took default values. The design is good, not many exposed parts and cables are neatly organized. However, I wouldn't recommend it for someone who's not willing or able to assemble it, as it came in a box full of parts, nuts, bolts, cables, and much other stuff. It took me several hours to assemble, following a very detailed video from SuperTechDan (look for it in Youtube), which I strongly recommend for the buyers, and it really requires to put hands-on and be careful not to damage any part. I think this is part of the fun and provides a clear understanding of all parts, but if you want something to print after 30 minutes, I suggest you look for another model instead.
HOMERS/TEVO® Tarantula Pro 3D Yazıcı Kit, 235x235x250mm Baskı Boyutu ile MKS GenL Anakart 0.4mm Volkan Nozul Desteği 1.75mm Filament
US$229.99 US$434.76
8
Yorumlar (4)
HOMERS/TEVO® Tarantula Pro 3D Yazıcı Kit, 235x235x250mm Baskı Boyutu ile MKS GenL Anakart 0.4mm Volkan Nozul Desteği 1.75mm Filament
US$229.99 US$434.76

Q: I am turkey so ı need to EU plug. Is EU plug ?

Soran gurtekin_ferdi Açık 2019-11-23 04:18:59

cirorodrigues Igot mine with EU plug, just order as that.

2020-11-19 12:11:48 Yararlı (0)
Gönder
cevaplar (4)
ANENG Q1 9999 Sayma True RMS Dijital Multimetre AC DC Gerilim Akım Direnç Kapasitans Sıcaklık Tester Otomatik/Manuel Ölçeklendirme Analog Bar Grafik ile
US$54.99 US$51.99

Q: after turning the power off and then on, in which measurement mode is the multimeter?

Soran Vladimir Açık 2018-06-02 10:34:02

cirorodrigues Itstarts as DC volts, auto range.

2020-11-19 12:11:15 Yararlı (0)
Gönder
cevaplar (4)
HOMERS/TEVO® Tarantula Pro 3D Yazıcı Kit, 235x235x250mm Baskı Boyutu ile MKS GenL Anakart 0.4mm Volkan Nozul Desteği 1.75mm Filament
US$229.99 US$434.76

Q: Does this product have stock in Brazil?

Soran BG543610848 Açık 2020-11-13 09:09:35

cirorodrigues Byend 2020, no.

2020-11-19 12:10:40 Yararlı (0)
Gönder
cevaplar (2)
Xiaomi Wowstick 1F + 64 in 1 Elektrikli Tornavida Yüksek Hassasiyetli USB Şarj LED Işık 56 Alaşım Çelik Batch Heads DIY ve Ev Onarımı için İdeal
US$65.99 US$79.99

Q: se comprar ainda tem que pagar uma taxa para tirar do correio ?

Soran danieldesouzasi Açık 2019-12-11 08:28:21

cirorodrigues Separar na Receita Federal e taxarem, sim, vai pagar a taxa dos Correios E o imposto de importao, E talvez ICMS.

2020-09-28 12:26:14 Yararlı (0)
Gönder
cevaplar (17)
DANIU Esnek Masa Büyük 5X USB LED Büyüteçli 33cm+33cm Braket 3 Renkli Aydınlatmalı Büyüteç Lambası Lup
US$28.99 US$43.99

Q: At what voltage is the light operating? 120V or 230V or, even, both voltages?

Soran Otto Açık 2019-11-12 10:49:32

cirorodrigues it's powered by any usb charger

2020-08-08 01:38:56 Yararlı (1)
Gönder
cevaplar (8)
cirorodrigues 10/01/2020
Product arrived well packaged and in good shape. It's a kit composed of several parts: electric screwdriver, three sets of bits, magnetic mat, a base, a small glass with tiny screws, a magnetizer/demagnetizer, a suction cup, a plastic tool for open plastic cases, a nice case to store the screwdriver and one set of bits and a short usb cable for recharge. It's all well finish, and screwdriver is light and confortable for use. There's a led in the point and it will light up when buttons are pressed. Keep in mind this is a precision tool for lightweight job, it doesn't have a strong tork, it won't go against to tight screws or to big ones. I could unscrew some harder ones by manually moving the tool as a regular screwdriver, but I'm not sure if this may damage the inner parts, so I wouldn't force it too much. Otherwise, it's quite convenient, easy to use and nice.
Xiaomi Wowstick 1F + 64 in 1 Elektrikli Tornavida Yüksek Hassasiyetli USB Şarj LED Işık 56 Alaşım Çelik Batch Heads DIY ve Ev Onarımı için İdeal
US$65.99 US$79.99
0
Tavsiyeler
Yorumlar (0)
cirorodrigues 11/10/2019
Useful stand, simple and straightforward.
MINI M-Stand Lehimleme Demir Stand Braketi Tutacağı
US$3.26 US$4.35
0
Tavsiyeler
Yorumlar (0)

Uzmansın, yardım edebilir misin?

Sizi Davet Yanıtı e-postasına abone olmaya içtenlikle davet ediyoruz!

Abone olursanız, sizi e-posta yoluyla insanların ürünlerle ilgili sorularını yanıtlamaya davet edeceğiz. Size abone olarak] ayrıca "Yararlı Rozeti " kazanacaksınız! Gizlilik ayarları sayfasından istediğiniz zaman aboneliğinizi iptal edebilirsiniz.

Başkalarına yardım edin ve daha mutlu olun!

  • Abone ol

Rozetler Hakkında

Rozetler toplulukla ilgilidir ve kullanıcılar kaliteli içerik oluşturarak, görevleri tamamlayarak veya özel etkinliklere katılarak rozet kazanırlar. Belirli kişilerin kendi özel rozetlerine sahip olmaları gerekir.
CEO ROZETİ

The CEO ünvanı yalnızca Banggood patronuna aittir.

Kazanabileceğiniz rozetler yakında geliyor
  • TAMAM

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • TAMAM

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe